FYI
Yes, once the machine is homed. any program that would exceed the limits
is flagged that it will exceed a specific axis limit in which direction
(+ or -). Also, you get that message when such a program is loaded. If
you jog toward the soft limit, motion will come to a smooth stop at the
soft limit.
The Axis GUI shows the bounding box of the loaded program in red on the
3D preview.
Jon
-------- Message transféré --------
Sujet : Re: [Emc-users] JOG motion inhibit
Date : Sat, 15 Jan 2022 12:25:21 -0600
De : Jon Elson <[email protected]>
Pour : jeanfrancois <[email protected]>
On 1/15/22 3:05 AM, jeanfrancois wrote:
Hello Leonardo,
It seems when you setup the configuration with steppers configu‐
rations, max speed, accelerations, ther’s also the X/Y/Z limits.
I think those limits are checked as long as the absolute positions has
been made with home, then the software limits is always enforced.
On top of this, you can build a hardware limits with limit switch‐
es and wire them into linux CNC.
Is this right ?
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
