Why not just engine coolant On Mon, 17 Jan 2022, 09:37 gene heskett, <ghesk...@shentel.net> wrote:
> I just fired up the 6040 to make a pocket for a 3mm sq nut. Noted that > the coolant tank was down about an inch from evaporation, but hand hand > on the tank could feel the pump buzzing so I assumed it was working. Its > an 80 gallon an hour submersible, probably for aquariums and such. So I > measure the nut to see how big a "pocket" to make to hold the nut. > > About 90% done with that, I noted an air bubble in the hoses to the top > of the motor was still there, feel the motor and it is pretty warm, check > the tank, cold. Lift the lid and find about 1/8" of dirty grey mold > sealing the top. So I'm back to trying to clean it out so I put half a > cup of lysol bathroom spray in it. But haven't disconnected it so I can > dump the tank in the back yard. Yet. > > Obviously the modern lysol isn't the magic twanger to keep it sweet. So > what do you folks use to keep a closed system sterile, non-corrosive and > functional? > > Thanks all. > > Cheers, Gene Heskett. > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
