On Sat, 22 Jan 2022, John Figie wrote:
Date: Sat, 22 Jan 2022 18:21:31 -0600
From: John Figie <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: emc-users <[email protected]>
Subject: [Emc-users] Some questions about configuring network cards and
hm2_eth for 7i80
So I'm finally ready to start putting some hardware together. I have my
mesa 7i80HD card.
My computer is running debian 10 at the moment and I have linuxCNC 2.8
installed and using preempt rt. My computer also has an additional NIC card.
When the OS boots the network interfaces are named using the new naming
scheme:
I have
enp3s0 on the MB and connected to my local network using addresses in the
range of 192.168.1.x
enp2s0f0 on the NIC and connected only to the 7i80
enp2s0f1 on the NIC and not connected.
I would like to use the default ethernet address for the 7i80 and assign
192.168.1.1 to the enp2s0f0 interface but i don't know if this will work.
The documentation seems to say this is not possible.
I would use 10.10.10.10 for the 7I80 and a static IP of 10.10.10.100/24 for the
host (to avoid overlap between the real time connections and possible NAT
address ranges on other host interfaces)
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
