There are several companies that make/made similar hole gages. I have ones with both a scale + magnifier similar to the one in the video and another with a DTI to read the diameter. The label on one of the magnifier ones says: KWIK-CHECK GAGE Company 7707 North U.S. #1, Suite 4 Vero Beach Florida 32967
The DTI one is a Brencor, Inc Model 130 I'll attach photos to another email. Hopefully they are not too large... -----Original Message----- From: fxkl47BF--- via Emc-users <emc-users@lists.sourceforge.net> Sent: February 17, 2022 9:07 PM To: Enhanced Machine Controller \(EMC\) <emc-users@lists.sourceforge.net> Cc: fxkl4...@protonmail.com Subject: Re: [Emc-users] small hole needle gauge thingy On Thu, 17 Feb 2022, Thomas J Powderly wrote: > hi, i think its a > > Helios-Preisser D?senlehre 0,1 mm 0 - 5 mm 0599102 > > helios maker of fine calipers, very old school tomp > > On 2/17/22 7:35 PM, fxkl47BF--- via Emc-users wrote: > >> Take a look at this video at time 16:30 Does anyone recognize this >> device https://www.youtube.com/watch?v=Xf7DuvcScyk At first glance I thought that might be a handy tool But it measures the lip of the hole So any burr or any deburring makes it useless It still looks cool _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
