On Wednesday, March 2, 2022 3:48:18 AM EST andy pugh wrote: > On Wed, 2 Mar 2022 at 08:27, gene heskett <ghesk...@shentel.net> wrote: > > So, can I start at y=0 b=0 and run to y=457.2 b=20574 in one gcode > > move? > Yes.
Thank you Andy. I'll proceed to do that when I get the 6040 put back together. I am about to swap 2 of its drives for 3 phase motors and that will be a major overhaul. Z motor already swapped but not its driver yet. Plus I've got a psu and a plan to use 4 or 5 teeny little air compressors to run the misters air supply. I'm burning up the shop compressor feeding it now. Air only to clear the sawdust for this. Might enhance the life of the tool by reducing the re-cutting. I am told by the lumber people that hard maple is now absorbing the air polution, and its getting more abrasive over the last 75 years. So I bought 20 cheap SC mills. For in case it burn marks the wood while I'm learning how to do this. Thanks again. Take care & stay well. Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
