Hey Gene, Yeah, SPI might have been an idea, I kinda liked the idea of a controller box over ethernet.
Anyway, the recommended USB adaptor has been ordered, hopefully this solves my problem, the issue is probably not the WiFi connection as such but the oddball routing though the wifi to ethernet gateway made from an old router ... On Sun, 6 Mar 2022 at 17:46, gene heskett <ghesk...@shentel.net> wrote: > On Sunday, 6 March 2022 06:35:56 EST Robin Szemeti via Emc-users wrote: > > The Pi4 and a Mesa ethernet card seemed like a brilliant idea when I > > bought mine ... I now regret it. The networking nightmare it has > > caused is painful. There is no WiFi down in my shed, only wired > > ethernet, so I had to put in a WiFi to ethernet bridge, connectivity > > is odd, sometimes it appears on the network, sometimes it doesn't. > > > > Any bright ideas on how to add a second ethernet port to the Pi? > > I'd think the rpi4 has the ability to use a usb-3 based ethernet dongle. > I've seen them mentioned now and then but have zero experience with them > so can't recommend a src. All I can say is look around and see what > amazon might have. Beats fleabay by about a month to your front door. > > But problems like that are why I chose the SPI based firmware in a mesa > 7i90HD. There, your interface problem is getting the OSHPark number for > the teeny little terminator board that connects the pi to the 7i90HD, Jon > Elson can probably supply that but you'll need a hot air station to put > in the grain of sand resistors, 3 of them, and a small bag of header > connctors. Because a right side up pi needs a cable twist, I mounted mine > upside down, putting the pi's headers on the same orientation as the 26 > pin on the 7i90HD, so my cable is only and inch or so long, highly > desirable for the SPI speeds. I had com problems with 7" individual > jumpers and no terminating reistors, but the board and ribbon combo Just > Works. 3 boards min order, was about a tenner when I built mine using a > pi3 several years ago. > > What part of this troubled planet are you on? > > Take care & stay well Robin. > > [...] > > Cheers, Gene Heskett. > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users