On Tuesday, 19 April 2022 12:54:44 EDT andy pugh wrote: > On Tue, 19 Apr 2022 at 17:28, gene heskett <ghesk...@shentel.net> wrote: > > Can I access it raw as the hex value? > > Yes, but why? > > > volts doesn't really represent what > > > > I need to work with > > What do you need to work with? > A pwmgen in the 5i25 will be used to throttle the compressors to regulate the pressure and quiet the compressors which are already 70 db quieter than the shop compressor. 5 of them in parallel, draws about 4 amps from a 12 volt supply. The pwmgen will be toggling one side of a bts-7960 seat motor controller at around 4 kilohertz where I can't hear it. This voltage will control the W in the pwmgen.
> > How would I go about determining the resistor value to feed that > > input > > from nominally 42.3 volts to just bring it to full scale? > > Why not use a divider network? > Thanks Andy. > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users