On Sun, 26 Jun 2022 at 15:45, dave engvall <dengv...@charter.net> wrote:
> A couple of solutions present themselves but neither are ideal. > Simply use the M6 shcs that hold the dogs in place to secure the CAT40. > Balance and adequate strength/safety would seem to present problems. Does the nose have any extra holes? There are 4 threaded holes with no obvious function on my 30INT spindle and looking around the internet I see threaded holes in some of the CAT40 spindles. It seems that you could use those to hold in a custom ER40 (or similar) adaptor. 4000 rpm probably isn't fast enough to need to worry too much about balance. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
