Le sam. 10 sept. 2022 à 11:55, Nicklas SB Karlsson <n...@nksb.eu> a écrit :
> Then pocket milling with tool engagement less than tool diameter for > some patterns tool engagement increase to tool diameter in the corners > or ends. Anybody have anyone have any experience or knowledge how to > handle this situation? > Generally, the best option is to have a tool radius < to corner radius to avoid having 1/4 to 1/2 of the tool engaged. When possible my prefered strategy is rough adaptive clearing with a bigger tool, then rough adaptive clearing of the corners with a smaller tool and (or directly) finishing pass with the same smaller tool. If tool radius = corner radius, best would be some kind of adaptive path to clear as much of material with limited engagement before the last clearing pass. The latter ideally being slowed down both in feed and speed. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
