That was my plan - use position-interpolated.. 100 counts is barely enough for smooth motion.
sam On Mon, Sep 19, 2022 at 11:51 AM andy pugh <bodge...@gmail.com> wrote: > On Mon, 19 Sept 2022 at 17:06, John Dammeyer <jo...@autoartisans.com> > wrote: > > > No. > > A slot is still a hole. So if you are counting, say falling edges, you > > will get 5 of them. If you count rising edges you will get 5 of them. > > > Actually, the missing-tooth scheme takes a different opinion. Each hole > corresponds to 1/6 of a revolution, so the correct scale is 6. But it only > responds to actual edges seen, so does not create a synthetic count in the > middle of the gap, instead it recognises the approximately double period > and adds two (or more) counts when it sees the gap. > > Using position-interpolated will smooth through this jitter. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
