On Sun, 9 Oct 2022 at 21:00, John Dammeyer <jo...@autoartisans.com> wrote: > > I thought I would try this with no expectations that it would actually work. > I have an apple MacBook Pro from around 2011 installed with the Raspberry Pi > version of Linux.
I don't really understand how that can even work, as Raspbian is for Armhf or Arm64, > I tried Andy's " sudo apt-get install linuxcnc" but as you can see below > it fails. Yes, because you are not running Bookworm. LinuxCNC only makes 2.9 packages for the things that you can find in here: buildbot.linuxcnc.org/dists/ -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
