On 2/17/23 11:43, dave engvall wrote:
HI all,
I've been occupied in building a new Y axis to go on top the x of my
contourmaster. Nothing like jousting with windmills.
1" rails on top of a cold drawn/hot roll frame. 5/8" ballscrew. With
the spindle as reference I get about a half thou deflection leaning on
the axis in the y direction and about a thou in the X direction. We'll
see how this works in practice.
Aux readout from a set of chinese glass scales to add interest. ;-)
Now with that done I need to hook up the stepper=servos.
My brain seems to have gone on holiday.
Controller is 5i25/7i76
http://servo.xlichuan.com/Private/ProductFiles/470763d1b2947213fdc2.pdf
I know the board is well protected but I'm not one to just hook things
up and hope the magic
smoke is well contained. ;-)
Thanks
Dave
That board combo works great here, Dave, two copies of it running
nicely. Decently self protected too.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
