Thanks John I will have a look in to this it sounds promising. On March 22, 2023 9:46:29 a.m. PDT, John Dammeyer <jo...@autoartisans.com> wrote: >I use this on the products I sell. >MG Chemicals 422B Modified Silicone Conformal Coating, Clear, 12 oz Aerosol >It's removable with MG's Heavy Duty Flux Remover. >John > >> -----Original Message----- >> From: Linden via Emc-users [mailto:emc-users@lists.sourceforge.net] >> Sent: March-22-23 8:53 AM >> To: Enhanced Machine Controller (EMC) >> Cc: Linden >> Subject: [Emc-users] Conformal coating available in North America >> >> Hello All, >> I'm looking for some help. Dose any one here have any experience with >> Conformal coatings for PCB >> boards. I'm looking for something available in North America in small >> quantities (approx 1 liter) What I have >> is a little PCB with through hole resistors soldered to it these get changed >> in the field to calibrate the unit. I >> am looking for something that can be applied and removed in the field to >> protect components and board >> from moisture in an environment that goes from -40 C to +150 C. Any help or >> suggestions would be much >> appreciated. Thanks Linden >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
