Hi There.I'm trying to work through setting up linuxcnc on a beaglebone
black. I've run the latency-test, with results that are not looking
good.has anyone else run this test with a Beaglebone black? Is there any
way to improve results.
Thanks very much.Alan
debian@BeagleBone:~/linuxcnc-dev/src$ latency-test
prog_name = '/home/debian/linuxcnc-dev/bin/rtapi_app'......Waited 3 seconds
for master. giving up.
.Note: Using POSIX realtime
.Unexpected realtime delay on task 0 with period 25000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
prog_name = '/home/debian/linuxcnc-dev/bin/rtapi_app'prog_name =
'pyvcp'.......................................***halcmd_commands 1565
Waiting for component 'lat' to become
ready.......................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.................................................
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
