Also had some problem. If I remember correct space in folder name was
the problem. It happened in newer version but not older.
Nicklas Karlsson
Den 2023-09-23 kl. 17:10, skrev Alan Condit via Emc-users:
When I edited the tool table under 2.8 it was working fine but now it doesn’t
work when I try to change tools and surprise, surprise,
the tool table is blank when I try to edit it. It loads the blank table. I have my tool
table “tool.tbl” in "~/linuxcnc/configs/" and a copy of my tool table
“tool.tbl” in the folder with my ini file “~/linuxcnc/configs/myCNCLathe/”. It has 9
tools in it and when I compared it to a backup and it appears identical.
My .ini file has
[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl
Any ideas what is going on? Where is it looking for the tool.tbl?
Thanks,
Alan
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
