Sweet these are just standard ac servo drives Next question
I'm running 2.8 Linux CNC Can I get the updated carousel component without updating. The reason is that the new kernels still don't work with realtec drivers as well as the old 4.19 kernel And also the standard iso Linux version is much more resource intensive and programs run at about half as snappy I have tried updating to 2.9 about 6 times now and always go back to 2.8 when I get a mesa card network error Regards Andrew On Thu, 11 Apr 2024, 20:49 andy pugh, <bodge...@gmail.com> wrote: > On Thu, 11 Apr 2024 at 04:57, andrew beck <andrewbeck0...@gmail.com> > wrote: > > > > > Does it still do shortest path calculations to speed up tool changes? > > > > If it is configured for that, yes. > > And 2nd question does it happen to support analog servo drives with a built > > in pid in linuxcnc? > > > It should be possible, depending on what control data the servos expect. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
