Yes. Just tried it and the lines below in the .init file do it provided you
have the files "ethercat_1joint.glade" and
"1joint_side_panel.glade" in same directory as .ini file:
# Add GladeVCP panel as a tab next to Preview/DRO:
EMBED_TAB_NAME=gladevcp2 demo
EMBED_TAB_COMMAND=halcmd loadusr -Wn gladevcp gladevcp -c gladevcp2 -x {XID}
ethercat_1joint.glade
# Add GladeVCP panel as side panel
GLADEVCP=1joint_side_panel.glade
If I remember correct there might be a problem if both panels have the same
name. On the line with EMBED_TAB_COMMAND I
can't remember exactly what all parameters do but hopefully the manual will
tell you·
Nicklas Karlsson
ons 2024-05-22 klockan 14:26 +0000 skrev Todd Zuercher via Emc-users:
> Is it possible with Axis to have a GladeVDP side panel, and have a
> different GladeVCP embedded in a tab at the same
> time? How about multiple embedded tabs?
>
> I've not seen examples how to do this.
>
> Todd Zuercher
> P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
> 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
