All good responses, many thanks! Still lots of outside work going on in prep 
for winter. Nights are freezing +- a few degrees. Will be back for more help if 
and when I need it. ;-) Rather certain I’ll need it. :-(.  Thanks to all who 
replied and even to those who considered replying. 

Dave

> On Oct 29, 2024, at 2:53 AM, andy pugh <bodge...@gmail.com> wrote:
> 
> On Tue, 29 Oct 2024 at 03:19, Dave Engvall <dengv...@charter.net> wrote:
> 
>> I could use guidance on a nice relable install that will handle a 5i25 -> 
>> i7i76.
> 
> Start with the standard install image from:
> http://linuxcnc.org/docs/stable/html/getting-started/getting-linuxcnc.html
> 
> Then you can use pncconf to set up the 5i25 / 7i76 (it will appear in
> the "CNC" menu after the install above)
> 
> It is probably useful to have some idea which pins are going to do
> what before starting the config, the mesa 7i76 docs should be helpful
> there:
> http://www.mesanet.com/pdf/parallel/7i76man.pdf
> 
> -- 
> atp
> "A motorcycle is a bicycle with a pandemonium attachment and is
> designed for the especial use of mechanical geniuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
> 
> 
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to