Yay! On Tue, Feb 25, 2025, 4:58 PM John Dammeyer <jo...@autoartisans.com> wrote:
> Yipee! It's alive! It's alive! > I had forgotten to check off one box in the network dialog. So the IP > address were all correct but no one was allowed to connect. > Now to move it into the mill cabinet and see if I can make hardware move. > John > > > > > -----Original Message----- > > From: John Dammeyer [mailto:jo...@autoartisans.com] > > Sent: February 25, 2025 12:29 PM > > To: Enhanced Machine Controller (EMC) > > Subject: [Emc-users] LinuxCNC 2.9.4 can't find MESA 7i92H > > > > Hi all, > > From 2.9.3 an apt update and upgrade gave me 2.9.4 without issues. > > > > Next problem. The MESA and Ethernet Cable work with the older 2.8.4 > > Raspbery Pi4 LinuxCNC as shown in attached photo. > > Move the cable over to the PC which has the same INI and HAL files as the > > 2.8 system with MESA 7i92H actually attached to a real mill. > > > > I know the internet works on this PC because it was used for all the > upgrade > > stuff etc. I unplugged the internet connection and rebooted the PC with > the > > MESA card connected. There is likely a simple solution to this. > Something > > needs to be configured somehow but what? > > > > I do have another PCI Ethernet card on order that should be here > tomorrow. > > Then I can have both regular network and also talk to the MESA but for > now > is > > there a solution? > > > > LINUXCNC - 2.9.4 > > Machine configuration directory is > > '/home/john/linuxcnc/configs/G3616-MESA-7i92' > > Machine configuration file is 'G3616-MESA-7i92.ini.expanded' > > Starting LinuxCNC... > > linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod > > Note: Using POSIX realtime > > Found file(REL): ./G3616-MESA-7i92.hal > > hm2: loading Mesa HostMot2 driver version 0.15 > > hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 > > hm2_eth: ERROR: can't connect: Network is unreachable > > hm2_eth: rtapi_app_main: Network is unreachable (-101) > > ./G3616-MESA-7i92.hal:10: waitpid failed /usr/bin/rtapi_app hm2_eth > > ./G3616-MESA-7i92.hal:10: /usr/bin/rtapi_app exited without becoming > > ready > > ./G3616-MESA-7i92.hal:10: insmod for hm2_eth failed, returned -1 Shutting > > down and cleaning up LinuxCNC... > > Running HAL shutdown script > > hm2: unloading > > Note: Using POSIX realtime > > LinuxCNC terminated with an error. You can find more information in the > > log: > > /home/john/linuxcnc_debug.txt > > and > > /home/john/linuxcnc_print.txt > > as well as in the output of the shell command 'dmesg' and in the terminal > > john@LinuxCNC-G3616:~$ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
