On Tue, 5 May 2026 18:58:31 +0100 andy pugh <[email protected]> wrote:
> 4. Drive disable inputs wired as if they were enables. > > With most stepper drivers you can leave the enable disconnected and > save some IO pins and wires. That was a nudge in the right direction. I removed the enables (the physical cables to be clear) and now all three axes move. Just for one second and then throw an error, but hey – I got it moving, which was the 1st milestone. I'll try to figure out the next issue and might come back if I can't solve it myself. Thanks for the hand-holding. Marco _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
