Hi all,
This has probably been discussed extensively in the EMU group. I am sorry to
bring it up again but I believe this is a bad design decision. I raised it in
my short review just sent to the list but I believe it is worthwhile to point
it out separately.
draft-ietf-emu-eap-tls13 introduces a new message to EAP-TLS, namely the
Commitment Message. This requires extra code in an implementation because the
normal behavior would be to run a TLS stack and then send encrypted data.
EAP-TLS does, however, not send application data*. This message changes this.
Not only does it not send encrypted application data it requires an
implementation to transmit a plaintext application data record after the
application traffic secret has been created and before that application traffic
secret is used to protect post handshake messages. This will make it difficult
to re-use an off-the-shelf TLS 1.3 stack.
There is very little motivation about this message other than
"
When an EAP server has sent its last handshake message (Finished or a
Post-Handshake), it commits to not sending any more handshake
messages by sending a Commitment Message.
"
I might miss something important here but why cannot the EAP-Success or
EAP-Failure serve that purpose?
Here are two examples to explain what I mean:
1. Failed exchange
EAP Peer EAP Server
EAP-Request/
<-------- Identity
EAP-Response/
Identity (Privacy-Friendly) -------->
EAP-Request/
EAP-Type=EAP-TLS
<-------- (TLS Start)
EAP-Response/
EAP-Type=EAP-TLS
(TLS ClientHello) -------->
EAP-Request/
EAP-Type=EAP-TLS
(TLS ServerHello,
TLS EncryptedExtensions,
TLS CertificateRequest,
TLS Certificate,
TLS CertificateVerify,
TLS Finished,
<-------- Commitment Message)
EAP-Response/
EAP-Type=EAP-TLS
(TLS Certificate,
TLS CertificateVerify,
TLS Finished) -------->
EAP-Request/
EAP-Type=EAP-TLS
<-------- (TLS Fatal Alert)
EAP-Response/
EAP-Type=EAP-TLS -------->
<-------- EAP-Failure
1. Successful Exchange with Post-Handshake NewSession Ticket
EAP Peer EAP Server
EAP-Request/
<-------- Identity
EAP-Response/
Identity (Privacy-Friendly) -------->
EAP-Request/
EAP-Type=EAP-TLS
<-------- (TLS Start)
EAP-Response/
EAP-Type=EAP-TLS
(TLS ClientHello) -------->
EAP-Request/
EAP-Type=EAP-TLS
(TLS ServerHello,
TLS EncryptedExtensions,
TLS CertificateRequest,
TLS Certificate,
TLS CertificateVerify,
<-------- TLS Finished)
EAP-Response/
EAP-Type=EAP-TLS
(TLS Certificate,
TLS CertificateVerify,
TLS Finished) -------->
EAP-Request/
EAP-Type=EAP-TLS
(TLS NewSessionTicket,
<-------- Commitment Message)
EAP-Response/
EAP-Type=EAP-TLS -------->
<-------- EAP-Success
Ciao
Hannes
(*): FWIW Post handshake messages are protected with the application traffic
secrets.
IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the contents to any
other person, use it for any purpose, or store or copy the information in any
medium. Thank you.
_______________________________________________
Emu mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/emu
