I need more info about this: 1. It looks like a clean install (DB created from scratch). why do you call it an upgrade? 2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually) 3. Any error in the httpd log? 4. What happens if you stop iptables and access your server with :8080?
Thanks, Ofer ----- Original Message ----- > Hi, > I built a set of ovirt engine RPM packages from near the latest > ovirt > engine source code. However, when I try to access the engine server > with URL "http://ovirt-engine-112:80";, the browser displayed a blank > page without http error returned. Any clue about what is going on > here? > Why didn't the engine administrator home page be shown? > > > And the packages were also installed successfully in my target > system, > checked this by "rpm -q -a|grep engine". > I) upgraded the packages to the 3.1 > > [root@ovirt-engine-112 ~]# rpm -q -a |grep engine > ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 > ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-jbossas-1.2-2.fc16.x86_64 > ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64 > ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64 > gtk2-engines-2.20.2-2.fc15.x86_64 > > Step II) > Then I used "engine-setup" to setup the engine. It seems that > everything is ok, see the log below. > > ------------- > [root@ovirt-engine-112 ~]# engine-setup > Welcome to oVirt Engine setup utility > HTTP Port [80] : > HTTPS Port [443] : > Host fully qualified domain name, note that this name should be fully > resolvable [ovirt-engine-112] : > ERROR: domain is not a valid domain name > User input failed validation, do you still wish to use it? (yes|no): > yes > Password for Administrator (admin@internal) : > Warning: Weak Password. > Confirm password : > Organization Name for the Certificate: cstl > The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'] > [NFS] : > Enter DB type for installation ['remote'| 'local'] [local] : > Local database password : > Warning: Weak Password. > Confirm password : > Should the installer configure NFS share on this server to be used as > an > ISO Domain? ['yes'| 'no'] [yes] : > Mount point path: /iso-dom > ERROR: mount point already exists in /etc/exports > Mount point path: /iso-dom > Display name for the ISO Domain: iso-domains > Firewall ports need to be opened. > You can let the installer configure iptables automatically overriding > the current configuration. The old configuration will be backed up. > Alternately you can configure the firewall later using an example > iptables file found under > /usr/share/ovirt-engine/conf/iptables.example > Configure iptables ? ['yes'| 'no']: yes > > oVirt Engine will be installed using the following configuration: > ================================================================= > http-port: 80 > https-port: 443 > host-fqdn: ovirt-engine-112 > auth-pass: ******** > org-name: cstl > default-dc-type: NFS > db-remote-install: local > db-local-pass: ******** > nfs-mp: /iso-dom > iso-domain-name: iso-domains > config-nfs: yes > override-iptables: yes > Proceed with the configuration listed above? (yes|no): yes > > Installing: > Configuring oVirt-engine... [ DONE ] > Creating CA... [ DONE ] > Editing JBoss Configuration... [ DONE ] > Setting Database Configuration... [ DONE ] > Setting Database Security... [ DONE ] > Creating Database... [ DONE ] > Updating the Default Data Center Storage Type... [ DONE ] > Editing oVirt Engine Configuration... [ DONE ] > Editing Postgresql Configuration... [ DONE ] > Configuring the Default ISO Domain... [ DONE ] > Configuring Firewall (iptables)... [ DONE ] > Starting JBoss Service... [ DONE ] > Handling HTTPD... [ DONE ] > > **** Installation completed successfully ****** > > (Please allow oVirt Engine a few moments to start up.....) > > > Additional information: > * SSL Certificate fingerprint: > C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF > * SSH Public key fingerprint: > 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42 > * A default ISO share has been created on this host. > If IP based access restrictions are required, please edit > /iso-dom > entry in /etc/exports > * The firewall has been updated, the old iptables configuration > file > was saved to > /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225 > * The installation log file is available at: > /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log > * Please use the user "admin" and password specified in order to > login > into oVirt Engine > * To configure additional users, first configure authentication > domains using the 'engine-manage-domains' utility > * To access oVirt Engine please go to the following URL: > http://ovirt-engine-112:80 > [root@ovirt-engine-112 ~]# > > > -- > Shu Ming<[email protected]> > IBM China Systems and Technology Laboratory > > > _______________________________________________ > Engine-devel mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/engine-devel > _______________________________________________ Engine-devel mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/engine-devel
