Ok this what I have done, I see it, I specify the engine address, then he ask me to "Retrieve Certificate" i do it, it works. After I choose "Save & Register", i can see "Activating VDMS", and "All changes were applied successfully". But nothing in the engine ... I tryed the other way but don't work too ... for this solution i'm nearly sure that it's cause the password is wrong, it isn't the one which i specified in ovirt-node.
2013/4/30 Alon Bar-Lev <[email protected]> > > Please reply to 'all'. > > When you login as admin you should be presented with Text User Interface. > Within this interface there should be options on the left and a dialog on > the right. > At the left you should see 'ovirt-engine' or similar option, when > selecting it, you should see on the right an input field of address of the > ovirt-engine server, specifying the engine address and selecting apply will > initiate registration into the engine. > > Once registered, you should see the host in the engine, select it and > click on "Approve". > > Another option is to specify password at the same dialog without filling > the engine address. This password may be used as the password withi the > 'Add Host' dialog. > > Alon > > ----- Original Message ----- > > From: "Florian BRUSCHET" <[email protected]> > > To: "Alon Bar-Lev" <[email protected]> > > Sent: Wednesday, May 1, 2013 12:00:01 AM > > Subject: Re: [Engine-devel] Root password to add Host > > > > I think I don't really understand what you call TUI? > > Yes I'm log as admin on ovirt-node to use Hypervisor > > > > (And sorry if I make some language faults English isn't my native > language > > ^^) > > > > > > 2013/4/30 Alon Bar-Lev <[email protected]> > > > > > > > > You cannot do this via agent by via the TUI of the ovirt-node. > > > > > > Just to make sure, you are using ovirt-node as hypervisor, right? > > > > > > ----- Original Message ----- > > > > From: "Florian BRUSCHET" <[email protected]> > > > > To: "Alon Bar-Lev" <[email protected]> > > > > Sent: Tuesday, April 30, 2013 11:47:53 PM > > > > Subject: Re: [Engine-devel] Root password to add Host > > > > > > > > Oh ok, i didn't know ... > > > > > > > > I was looking my oVirt Engine and i don't understand how i can add an > > > Host > > > > without this password ... > > > > For me i have to right click on the Hosts panel, select "new" and it > asks > > > > me to give name, address and Root password. > > > > I have already register this Host from oVirt Node Hypervisor, i add > my > > > > Management Server and there is no problem i can see "Certificate > Status : > > > > Verified" but this Host don't appears in the Web page ... > > > > > > > > > > > > 2013/4/30 Alon Bar-Lev <[email protected]> > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Florian BRUSCHET" <[email protected]> > > > > > > To: "Alon Bar-Lev" <[email protected]> > > > > > > Sent: Tuesday, April 30, 2013 11:06:14 PM > > > > > > Subject: Re: [Engine-devel] Root password to add Host > > > > > > > > > > > > For me single mode it's when you add "single" at the end of the > > > kernel > > > > > > commande line like that you boot on shell commande as > > > > > > root@localhostand > > > > > > you can do what you want. > > > > > > > > > > Oh... this is "single user mode"... :) > > > > > > > > > > > > > > > > > I will try it soon! > > > > > > > > > > > > Thank you > > > > > > > > > > > > Florian > > > > > > > > > > > > > > > > > > 2013/4/30 Alon Bar-Lev <[email protected]> > > > > > > > > > > > > > What is 'single mode'? > > > > > > > > > > > > > > You should be able to set root password via node TUI, at ovirt > tab. > > > > > > > Or... you can simply perform registration via the node TUI, so > you > > > > > don't > > > > > > > need to specify password at all. > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > From: "Florian BRUSCHET" <[email protected]> > > > > > > > > To: [email protected] > > > > > > > > Sent: Tuesday, April 30, 2013 7:28:12 PM > > > > > > > > Subject: [Engine-devel] Root password to add Host > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > I try to add Host from oVirt Engine Web Administration, but > it > > > asks > > > > > me to > > > > > > > > give a Root Password (It's not the same that i used to log in > > > admin > > > > > on > > > > > > > the > > > > > > > > Node). > > > > > > > > Do i really need this Root Password? Because i can't have it > and > > > i > > > > > don't > > > > > > > want > > > > > > > > to change it by using single mode... > > > > > > > > There is an other solution to add Hosts? > > > > > > > > > > > > > > > > Thank you, > > > > > > > > > > > > > > > > Florian BRUSCHET > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Engine-devel mailing list > > > > > > > > [email protected] > > > > > > > > http://lists.ovirt.org/mailman/listinfo/engine-devel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
_______________________________________________ Engine-devel mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/engine-devel
