I have exported some config valid through IPC. This is all I could get
done in about 1 hour.
Stafford
--
Index: e_config.c
===================================================================
RCS file: /cvsroot/enlightenment/e17/apps/e/src/bin/e_config.c,v
retrieving revision 1.67
diff -u -r1.67 e_config.c
--- e_config.c 29 Jun 2005 08:49:54 -0000 1.67
+++ e_config.c 30 Jun 2005 00:17:03 -0000
@@ -142,15 +142,15 @@
E_CONFIG_LIST(D, T, path_append_backgrounds, _e_config_path_append_edd); /**/
E_CONFIG_VAL(D, T, focus_policy, INT); /**/
E_CONFIG_VAL(D, T, focus_setting, INT); /**/
- E_CONFIG_VAL(D, T, pass_click_on, INT);
- E_CONFIG_VAL(D, T, always_click_to_raise, INT);
- E_CONFIG_VAL(D, T, use_auto_raise, INT);
- E_CONFIG_VAL(D, T, auto_raise_delay, DOUBLE);
- E_CONFIG_VAL(D, T, use_resist, INT);
- E_CONFIG_VAL(D, T, drag_resist, INT);
- E_CONFIG_VAL(D, T, desk_resist, INT);
- E_CONFIG_VAL(D, T, window_resist, INT);
- E_CONFIG_VAL(D, T, gadget_resist, INT);
+ E_CONFIG_VAL(D, T, pass_click_on, INT); /**/
+ E_CONFIG_VAL(D, T, always_click_to_raise, INT); /**/
+ E_CONFIG_VAL(D, T, use_auto_raise, INT); /**/
+ E_CONFIG_VAL(D, T, auto_raise_delay, DOUBLE); /**/
+ E_CONFIG_VAL(D, T, use_resist, INT); /**/
+ E_CONFIG_VAL(D, T, drag_resist, INT); /**/
+ E_CONFIG_VAL(D, T, desk_resist, INT); /**/
+ E_CONFIG_VAL(D, T, window_resist, INT); /**/
+ E_CONFIG_VAL(D, T, gadget_resist, INT); /**/
E_CONFIG_VAL(D, T, winlist_warp_while_selecting, INT);
E_CONFIG_VAL(D, T, winlist_warp_at_end, INT);
E_CONFIG_VAL(D, T, winlist_warp_speed, DOUBLE);
@@ -169,7 +169,7 @@
E_CONFIG_VAL(D, T, winlist_pos_min_h, INT);
E_CONFIG_VAL(D, T, winlist_pos_max_w, INT);
E_CONFIG_VAL(D, T, winlist_pos_max_h, INT);
- E_CONFIG_VAL(D, T, maximize_policy, INT);
+ E_CONFIG_VAL(D, T, maximize_policy, INT); /**/
E_CONFIG_VAL(D, T, kill_if_close_not_possible, INT);
E_CONFIG_VAL(D, T, kill_process, INT);
E_CONFIG_VAL(D, T, kill_timer_wait, DOUBLE);
Index: e_ipc_handlers.h
===================================================================
RCS file: /cvsroot/enlightenment/e17/apps/e/src/bin/e_ipc_handlers.h,v
retrieving revision 1.43
diff -u -r1.43 e_ipc_handlers.h
--- e_ipc_handlers.h 27 Jun 2005 13:50:10 -0000 1.43
+++ e_ipc_handlers.h 30 Jun 2005 00:17:06 -0000
@@ -2486,7 +2486,373 @@
#elif (TYPE == E_REMOTE_IN)
#endif
#undef HDL
-/*****/
+
+/****************************************************************************/
+#define HDL E_IPC_OP_ALWAYS_CLICK_TO_RAISE_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-always-click-to-raise-set", 1, "Set the always click to raise policy, 1 for enabled 0 for disabled", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(policy, HDL);
+ e_config->always_click_to_raise = policy;
+ E_CONFIG_LIMIT(e_config->always_click_to_raise, 0, 1);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_ALWAYS_CLICK_TO_RAISE_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-always-click-to-raise-get", 0, "Get the always click to raise policy, 1 for enabled 0 for disabled", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->always_click_to_raise, E_IPC_OP_ALWAYS_CLICK_TO_RAISE_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_ALWAYS_CLICK_TO_RAISE_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(policy, HDL);
+ printf("REPLY: POLICY=%d\n", policy);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_USE_AUTO_RAISE_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-use-auto-raise-set", 1, "Set use auto raise policy, 1 for enabled 0 for disabled", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(policy, HDL);
+ e_config->use_auto_raise = policy;
+ E_CONFIG_LIMIT(e_config->use_auto_raise, 0, 1);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_USE_AUTO_RAISE_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-use-auto-raise-get", 0, "Get use auto raise policy, 1 for enabled 0 for disabled", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->use_auto_raise, E_IPC_OP_USE_AUTO_RAISE_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_USE_AUTO_RAISE_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(policy, HDL);
+ printf("REPLY: POLICY=%d\n", policy);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_PASS_CLICK_ON_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-pass-click-on-set", 1, "Set pass click on policy, 1 for enabled 0 for disabled", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(policy, HDL);
+ e_config->pass_click_on = policy;
+ E_CONFIG_LIMIT(e_config->pass_click_on, 0, 1);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_PASS_CLICK_ON_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-pass-click-on-get", 0, "Get pass click on policy, 1 for enabled 0 for disabled", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->pass_click_on, E_IPC_OP_PASS_CLICK_ON_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_PASS_CLICK_ON_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(policy, HDL);
+ printf("REPLY: POLICY=%d\n", policy);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_AUTO_RAISE_DELAY_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-auto-raise-delay-set", 1, "Set the auto raise delay (Seconds)", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_DOUBLE(atof(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_DOUBLE(dbl, HDL);
+ e_config->auto_raise_delay = dbl;
+ E_CONFIG_LIMIT(e_config->auto_raise_delay, 0.0, 5.0);
+ SAVE;
+ END_DOUBLE;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_AUTO_RAISE_DELAY_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-auto-raise-delay-get", 0, "Get the auto raise delay (Seconds)", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_DOUBLE(e_config->auto_raise_delay, E_IPC_OP_AUTO_RAISE_DELAY_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_AUTO_RAISE_DELAY_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_DOUBLE(dbl, HDL);
+ printf("REPLY: DELAY=%3.3f\n", dbl);
+ END_DOUBLE;
+#endif
+#undef HDL
+
+/****************************************************************************/
+
+#define HDL E_IPC_OP_USE_RESIST_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-use-resist-set", 1, "Set resist policy, 1 for enabled 0 for disabled", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(policy, HDL);
+ e_config->use_resist = policy;
+ E_CONFIG_LIMIT(e_config->use_resist, 0, 1);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_USE_RESIST_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-use-resist-get", 0, "Get use resist policy, 1 for enabled 0 for disabled", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->use_resist, E_IPC_OP_USE_RESIST_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_USE_RESIST_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(policy, HDL);
+ printf("REPLY: POLICY=%d\n", policy);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+
+#define HDL E_IPC_OP_DRAG_RESIST_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-drag-resist-set", 1, "Set drag resist threshold (0-100)", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(val, HDL);
+ e_config->drag_resist = val;
+ E_CONFIG_LIMIT(e_config->drag_resist, 0, 100);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_DRAG_RESIST_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-drag-resist-get", 0, "Get drag resist threshold", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->drag_resist, E_IPC_OP_DRAG_RESIST_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_DRAG_RESIST_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(val, HDL);
+ printf("REPLY: THRESHOLD=%d\n", val);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+
+#define HDL E_IPC_OP_DESK_RESIST_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-desk-resist-set", 1, "Set desktop resist threshold (0-100)", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(val, HDL);
+ e_config->desk_resist = val;
+ E_CONFIG_LIMIT(e_config->desk_resist, 0, 100);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_DESK_RESIST_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-desk-resist-get", 0, "Get desktop resist threshold", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->desk_resist, E_IPC_OP_DESK_RESIST_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_DESK_RESIST_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(val, HDL);
+ printf("REPLY: THRESHOLD=%d\n", val);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+
+#define HDL E_IPC_OP_WINDOW_RESIST_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-window-resist-set", 1, "Set window resist threshold (0-100)", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(val, HDL);
+ e_config->window_resist = val;
+ E_CONFIG_LIMIT(e_config->window_resist, 0, 100);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_WINDOW_RESIST_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-window-resist-get", 0, "Get window resist threshold", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->window_resist, E_IPC_OP_WINDOW_RESIST_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_WINDOW_RESIST_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(val, HDL);
+ printf("REPLY: THRESHOLD=%d\n", val);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
+
+#define HDL E_IPC_OP_GADGET_RESIST_SET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-gadget-resist-set", 1, "Set gadget resist threshold (0-100)", 0, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_INT(atoi(params[0]), HDL);
+#elif (TYPE == E_WM_IN)
+ START_INT(val, HDL);
+ e_config->gadget_resist = val;
+ E_CONFIG_LIMIT(e_config->gadget_resist, 0, 100);
+ SAVE;
+ END_INT;
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_GADGET_RESIST_GET
+#if (TYPE == E_REMOTE_OPTIONS)
+ OP("-gadget-resist-get", 0, "Get gadget resist threshold", 1, HDL)
+#elif (TYPE == E_REMOTE_OUT)
+ REQ_NULL(HDL);
+#elif (TYPE == E_WM_IN)
+ SEND_INT(e_config->gadget_resist, E_IPC_OP_GADGET_RESIST_GET_REPLY, HDL);
+#elif (TYPE == E_REMOTE_IN)
+#endif
+#undef HDL
+
+/****************************************************************************/
+#define HDL E_IPC_OP_GADGET_RESIST_GET_REPLY
+#if (TYPE == E_REMOTE_OPTIONS)
+#elif (TYPE == E_REMOTE_OUT)
+#elif (TYPE == E_WM_IN)
+#elif (TYPE == E_REMOTE_IN)
+ START_INT(val, HDL);
+ printf("REPLY: THRESHOLD=%d\n", val);
+ END_INT;
+#endif
+#undef HDL
+
+/****************************************************************************/
#if 0
}
Index: e_ipc_handlers_list.h
===================================================================
RCS file: /cvsroot/enlightenment/e17/apps/e/src/bin/e_ipc_handlers_list.h,v
retrieving revision 1.4
diff -u -r1.4 e_ipc_handlers_list.h
--- e_ipc_handlers_list.h 18 Jun 2005 12:51:00 -0000 1.4
+++ e_ipc_handlers_list.h 30 Jun 2005 00:17:06 -0000
@@ -84,3 +84,31 @@
#define E_IPC_OP_MAXIMIZE_POLICY_SET 84
#define E_IPC_OP_MAXIMIZE_POLICY_GET 85
#define E_IPC_OP_MAXIMIZE_POLICY_GET_REPLY 86
+#define E_IPC_OP_ALWAYS_CLICK_TO_RAISE_SET 87
+#define E_IPC_OP_ALWAYS_CLICK_TO_RAISE_GET 88
+#define E_IPC_OP_ALWAYS_CLICK_TO_RAISE_GET_REPLY 89
+#define E_IPC_OP_USE_AUTO_RAISE_SET 90
+#define E_IPC_OP_USE_AUTO_RAISE_GET 91
+#define E_IPC_OP_USE_AUTO_RAISE_GET_REPLY 92
+#define E_IPC_OP_PASS_CLICK_ON_SET 93
+#define E_IPC_OP_PASS_CLICK_ON_GET 94
+#define E_IPC_OP_PASS_CLICK_ON_GET_REPLY 95
+#define E_IPC_OP_AUTO_RAISE_DELAY_SET 96
+#define E_IPC_OP_AUTO_RAISE_DELAY_GET 97
+#define E_IPC_OP_AUTO_RAISE_DELAY_GET_REPLY 98
+#define E_IPC_OP_USE_RESIST_SET 99
+#define E_IPC_OP_USE_RESIST_GET 100
+#define E_IPC_OP_USE_RESIST_GET_REPLY 101
+#define E_IPC_OP_DRAG_RESIST_SET 102
+#define E_IPC_OP_DRAG_RESIST_GET 103
+#define E_IPC_OP_DRAG_RESIST_GET_REPLY 104
+#define E_IPC_OP_DESK_RESIST_SET 105
+#define E_IPC_OP_DESK_RESIST_GET 106
+#define E_IPC_OP_DESK_RESIST_GET_REPLY 107
+#define E_IPC_OP_WINDOW_RESIST_SET 108
+#define E_IPC_OP_WINDOW_RESIST_GET 109
+#define E_IPC_OP_WINDOW_RESIST_GET_REPLY 110
+#define E_IPC_OP_GADGET_RESIST_SET 111
+#define E_IPC_OP_GADGET_RESIST_GET 112
+#define E_IPC_OP_GADGET_RESIST_GET_REPLY 113
+
Index: e_resist.c
===================================================================
RCS file: /cvsroot/enlightenment/e17/apps/e/src/bin/e_resist.c,v
retrieving revision 1.10
diff -u -r1.10 e_resist.c
--- e_resist.c 14 Jun 2005 10:19:25 -0000 1.10
+++ e_resist.c 30 Jun 2005 00:17:07 -0000
@@ -20,21 +20,12 @@
int x, int y, int w, int h,
int *rx, int *ry, int *rw, int *rh)
{
- int resist = 1;
- int desk_resist = 32;
- int win_resist = 12;
- int gad_resist = 32;
Evas_List *l, *ll, *rects = NULL;
E_Resist_Rect *r;
E_Border_List *bl;
E_Border *bd;
-
- resist = e_config->use_resist;
- desk_resist = e_config->desk_resist;
- win_resist = e_config->window_resist;
- gad_resist = e_config->gadget_resist;
- /* FIXME: get resist values from config */
- if (!resist)
+
+ if (!e_config->use_resist)
{
*rx = x;
*ry = y;
@@ -64,7 +55,7 @@
E_Zone *zone;
zone = l->data;
- HOLDER(zone->x, zone->y, zone->w, zone->h, desk_resist);
+ HOLDER(zone->x, zone->y, zone->w, zone->h, e_config->desk_resist);
}
/* FIXME: need to add resist or complete BLOCKS for things like ibar */
/* can add code here to add more fake obstacles with custom resist values */
@@ -88,7 +79,7 @@
}
if (ok)
{
- OBSTACLE(bd->x, bd->y, bd->w, bd->h, win_resist);
+ OBSTACLE(bd->x, bd->y, bd->w, bd->h, e_config->window_resist);
}
}
}
@@ -99,7 +90,7 @@
E_Gadman_Client *gmc;
gmc = l->data;
- OBSTACLE(gmc->x, gmc->y, gmc->w, gmc->h, gad_resist);
+ OBSTACLE(gmc->x, gmc->y, gmc->w, gmc->h, e_config->gadget_resist);
}
if (rects)
{
@@ -123,13 +114,10 @@
int x, int y, int w, int h,
int *rx, int *ry)
{
- int resist = 1;
- int gad_resist = 32;
Evas_List *l, *ll, *rects = NULL;
E_Resist_Rect *r;
- /* FIXME: get resist values from config */
- if (!resist)
+ if (!e_config->use_resist)
{
*rx = x;
*ry = y;
@@ -159,7 +147,7 @@
r->y = gmc->y;
r->w = gmc->w;
r->h = gmc->h;
- r->v1 = gad_resist;
+ r->v1 = e_config->gadget_resist;
rects = evas_list_append(rects, r);
}
}
