Carsten Haitzler (The Rasterman) wrote:
<snipped>
>PowerEdge 850 (1u): Pentium D Dual core 3.2Ghz 2x1MB L2 Cache, 2GB 667MHz DDR
>RAM, SATA Raid Controller, 2x250GB SATA 7200rpm Drives, 24x speed CD. Standard
>next business day on site warranty support (nothing special) = $2744
>
>PowerEdge 1850 (2u): 3Ghz Xeon 2MB L2 Cache x 2, 2GB 400Mhz DDR RAM, SCSI Raid
>Controller, 2x146GB SCSI 10000rpm Drives, 24x speed CDROM. Standard next
>business day on site warranty support (nothing special) = $4272
>
>
I hate to throw a spanner in the works here, but on the other hand ...
One of my friends is winding up his software business and selling off
assets. One asset of particular interest is a Dell server that might be
just what you're after. It's been strictly a test box, and while it's
probably been turned on 24/7 for the past 2 years or so, it has had *NO*
load at all ... if that makes any difference.
He's asking $1,000 ( Australian ). I'll let others comment on the value
/ relative performance. If you're after something new / faster, then
fair enough - thought I'd let people know in case it looks attractive (
which I suppose will depend on how much money is raised ).
Here are the specs ...
- Dell 2600 with some 2800 bits ( approx 2 years old )
- Dual 2 Gig Xeon ( with hyperthreading )
- 512K L2 cache
- 1GB RAM
- LSI Logic 1030 Ultra320 SCSI card (not raid, but quite fast)
- 2 * 18GB Seagate ST318453LC scsi drives
- Gig ethernet
lspci:
0000:00:00.0 Host bridge: Intel Corporation E7500 Memory Controller Hub
(rev 03)
0000:00:02.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface B
PCI-to-PCI Bridge (rev 03)
0000:00:03.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface C
PCI-to-PCI Bridge (rev 03)
0000:00:04.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface D
PCI-to-PCI Bridge (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1)
(rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corporation 82801CA LPC Interface
Controller (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801CA Ultra ATA Storage
Controller (rev 02)
0000:01:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03)
0000:01:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
(rev 03)
0000:01:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03)
0000:01:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
(rev 03)
0000:03:01.0 Ethernet controller: Intel Corporation 82544GC Gigabit
Ethernet Controller (LOM) (rev 02)
0000:04:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03)
0000:04:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
(rev 03)
0000:04:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03)
0000:04:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
(rev 03)
0000:07:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03)
0000:07:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
(rev 03)
0000:07:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03)
0000:07:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge
(rev 03)
0000:08:08.0 PCI bridge: Intel Corporation 80303 I/O Processor
PCI-to-PCI Bridge (rev 01)
0000:09:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030
PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
0000:09:0d.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030
PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
0000:0b:04.0 VGA compatible controller: ATI Technologies Inc Rage XL
(rev 27)
dmesg:
Linux version 2.6.12-gentoo-r4 ([EMAIL PROTECTED]) (gcc version 3.3.5-20050130
(Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP
Fri Jul 8 10:15:12 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000003ffe0000 (usable)
BIOS-e820: 000000003ffe0000 - 000000003ffefc00 (ACPI data)
BIOS-e820: 000000003ffefc00 - 000000003ffff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 262112
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32736 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fdc20
ACPI: RSDT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdc34
ACPI: FADT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdc64
ACPI: MADT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdcd8
ACPI: SPCR (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdd96
ACPI: DSDT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x06] address[0xfec81000] gsi_base[72])
IOAPIC[2]: apic_id 6, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x07] address[0xfec82000] gsi_base[120])
IOAPIC[3]: apic_id 7, version 32, address 0xfec82000, GSI 120-143
ACPI: IOAPIC (id[0x08] address[0xfec82800] gsi_base[144])
IOAPIC[4]: apic_id 8, version 32, address 0xfec82800, GSI 144-167
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ffff000:bec01000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Gentoo ro root=813
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
mapped IOAPIC to ffffa000 (fec81000)
mapped IOAPIC to ffff9000 (fec82000)
mapped IOAPIC to ffff8000 (fec82800)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1994.427 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035124k/1048448k available (2187k kernel code, 12556k reserved,
603k data, 200k init, 130944k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 3932.16 BogoMIPS (lpj=1966080)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400
00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400
00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Booting processor 2/2 eip 2000
Initializing CPU#2
Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400
00000000 00000000
CPU2: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Booting processor 3/3 eip 2000
Initializing CPU#3
Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400
00000000 00000000
CPU3: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Total of 4 processors activated (15876.09 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
CPU0 attaching sched-domain:
domain 0: span 03
groups: 01 02
domain 1: span 0f
groups: 03 0c
CPU1 attaching sched-domain:
domain 0: span 03
groups: 02 01
domain 1: span 0f
groups: 03 0c
CPU2 attaching sched-domain:
domain 0: span 0c
groups: 04 08
domain 1: span 0f
groups: 0c 03
CPU3 attaching sched-domain:
domain 0: span 0c
groups: 08 04
domain 1: span 0f
groups: 0c 03
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfc6ce, last bus=11
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:0b:04.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.P2PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.P2PD._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PE.ZION._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PF._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *11 12 14)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 *5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:0a: ioport range 0x800-0x87f could not be reserved
pnp: 00:0a: ioport range 0x880-0x8bf has been reserved
pnp: 00:0a: ioport range 0x8c0-0x8df has been reserved
pnp: 00:0a: ioport range 0xc00-0xc1f has been reserved
pnp: 00:0a: ioport range 0xca2-0xca7 has been reserved
pnp: 00:0a: ioport range 0xc20-0xc2f has been reserved
highmem bounce pool size: 64 pages
inotify device minor=63
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
SGI XFS with ACLs, security attributes, realtime, large block numbers,
no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
hda: Disabling (U)DMA for SAMSUNG CD-ROM SN-124 (blacklisted)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Fusion MPT base driver 3.01.20
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI Interrupt 0000:09:0d.0[A] -> GSI 120 (level, low) -> IRQ 120
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
ACPI: PCI Interrupt 0000:09:0d.1[B] -> GSI 121 (level, low) -> IRQ 121
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.20
scsi0 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=120
Vendor: SEAGATE Model: ST318453LC Rev: DX03
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST318453LC Rev: DX03
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdb: 35566478 512-byte hdwr sectors (18210 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 35566478 512-byte hdwr sectors (18210 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p2 p3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: PE/PV Model: 1x6 SCSI BP Rev: 0.29
Type: Processor ANSI SCSI revision: 02
scsi1 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=121
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
ReiserFS: sdb3: found reiserfs format "3.6" with standard journal
ReiserFS: sdb3: using ordered data mode
ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sdb3: checking transaction log (sdb3)
ReiserFS: sdb3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 200k freed
Adding 2008116k swap on /dev/sdb2. Priority:-1 extents:1
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 28 (level, low) -> IRQ 28
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bce0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c039fb00(lo)
IPv6 over IPv4 tunneling driver
Real Time Clock Driver v1.12
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
eth0: no IPv6 routers present
--
BEGIN-ANTISPAM-VOTING-LINKS
------------------------------------------------------If you are not the CanIt
administrator and you think this
message is spam, please give the id 36850 and magic value
d868c5d99833 to [EMAIL PROTECTED] to be marked as spam.
Teach CanIt if this mail (ID 36850) is spam:
Spam: http://entropy.homelinux.org/canit/b.php?c=s&i=36850&m=d868c5d99833
Not spam: http://entropy.homelinux.org/canit/b.php?c=n&i=36850&m=d868c5d99833
Forget vote: http://entropy.homelinux.org/canit/b.php?c=f&i=36850&m=d868c5d99833
------------------------------------------------------
END-ANTISPAM-VOTING-LINKS
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
enlightenment-devel mailing list
enlightenment-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
