On 05/24/11 06:09, Mike Blumenkrantz wrote: > > I had plug an external USB hard drive which was detected here: > > > > device: > > /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb1 > > You probably know it better as /dev/sdb1 It's formatted as ext3! > > > > and there: > > > > Internal drives, anyone? With serial numbers? > > /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host2/target2:0:0/2:0:0:0/block/sdb: > > SAMSUNG_HM500JI_1F90179626FF-0:0 > > /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda: > > ST910021AS_5MH0A42E > > > > /dev/sdb is the external one, on USB, /dev/sda the internal one. The > > output doesn't seem right and I understand your questioni now. > > > > On the other hand, there was a CD in /dev/sr0, as shown here: > > > > device: > > /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 > > You probably know it better as /dev/sr0 It's formatted as iso9660! > > > > I plugged an USB mouse at the end of the test, as asked. > > > you are using the test located in eeze/src/bin, correct? not one which was > previously installed?
I use to build the EFL very often for testing slacke17. eeze was already installed system wide on my computer (r59632) but without the test binary*. I built a new one in /tmp using exactly the same code, from r59632. * eeze_udev_test is not installed by default even if it is build. -- Jérôme Pinot http://ngc891.blogdns.net/
signature.asc
Description: Digital signature
------------------------------------------------------------------------------ vRanger cuts backup time in half-while increasing security. With the market-leading solution for virtual backup and recovery, you get blazing-fast, flexible, and affordable data protection. Download your free trial now. http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________ enlightenment-devel mailing list enlightenment-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
