Sorry, had to step out for a bit. I just tried to recompile and eio is failing right now. Trying to get that fixed now. Going on #e now.
On Feb 21, 2012, at 5:14 PM, Leif Middelschulte wrote: > 2012/2/21 mh <[email protected]>: >> Attached is the xsession-errors file generated when trying to start r.68231. >> Sorry about the mixup. > I just commited another possible fix.Could you join #e on freenode in > case it doesn't help? >> >> >> >> >> >> On Feb 21, 2012, at 3:18 PM, Leif Middelschulte wrote: >> >>> 2012/2/21 mh <[email protected]>: >>>> Hi Leif, >>>> >>>> File attached. Thanks! >>> That log is from an outdated version of e. Please update and resend! >>>> >>>> >>>> >>>> >>>> On Feb 21, 2012, at 2:11 PM, Leif Middelschulte wrote: >>>> >>>>> Hi mike, >>>>> >>>>> thanks for your report. >>>>> >>>>> 2012/2/21 mh <[email protected]>: >>>>>> I think there is again a problem with e_randr since after r.68113. >>>>>> Beginning with r. 68114 I am seeing the same problem that r.66638 I >>>>>> think fixed. I'm including the original emails about this below. I >>>>>> noticed from trac that 68114 was a lot of work done to e_randr so I >>>>>> suspect this is the problem. >>>>>> >>>>>> I have a Radeon 5770 card, and the earlier problem seemed to be with at >>>>>> least ATI 5770/5750 series graphics cards. X starts and shows GKrellM is >>>>>> working, but Enlightenment does not start properly. >>>>>> >>>>>> What can I do to help? Thanks. >>>>> >>>>> Could you send the output of stderr e.g. ~/.xsessrion-errors please? >>>>>> >>>>>> mike >>>>>> >>>>>> >>>>>>> On Dec 29, 2011, at 1:30 PM, Leif Middelschulte wrote: >>>>>>> >>>>>>>> 2011/12/28 Leif Middelschulte <[email protected]>: >>>>>>>>> >>>>>>>>> Hi Mike, >>>>>>>>> >>>>>>>>> thanks your effort. The backtraces look promising. >>>>>>>>> >>>>>>>>> I'll have a look soon and hope to be able to fix this issue. >>>>>>>>> >>>>>>>> I hope it's fixed now :-) >>>>>>> >>>>>>> >>>>>>> Perfect! Thanks very much Leif! >>>>>>> >>>>>>> mike >>>>>>> >>>>>>> >>>>>>>>> Am 27.12.2011 um 14:42 schrieb mh <[email protected]>: >>>>>>>>> >>>>>>>>>> I learned how to record the gdb session. The attached gdb sessions >>>>>>>>>> may >>>>>>>>>> provide more useful information. One gdb session run as root, the >>>>>>>>>> other as >>>>>>>>>> user. Ran to break, then stepped through. Hope this helps. >>>>>>>>>> >>>>>>>>>> mike >>>>>>>>>> >>>>>>>>>> <e-log-root.txt> >>>>>>>>>> <e-log.txt> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> On Dec 25, 2011, at 11:49 AM, Leif Middelschulte wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Mike, >>>>>>>>>>>> >>>>>>>>>>>> sorry for this late reply, but am kept busy with rl. >>>>>>>>>>>> Find comments in their respective context. >>>>>>>>>>>> >>>>>>>>>>>> 2011/12/24 mh <[email protected]>: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Dec 23, 2011, at 12:27 PM, Leif Middelschulte wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2011/12/23 mh <[email protected]>: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Salute: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I'm having the same issue using two different distros on the >>>>>>>>>>>>>>>>>> same >>>>>>>>>>>>>>>>>> hardware (two drives). >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> When I'm running Arch, I'm running xorg-server 1.11.3-1 , >>>>>>>>>>>>>>>>>> using >>>>>>>>>>>>>>>>>> xf86-video-ati 6.14.3-1 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Debian, sid, I have xserver-xorg-core 1.11.2.902-1, using >>>>>>>>>>>>>>>>>> xserver-xorg-video-radeon 6.14.3-2 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I'd like you to start e via gdb (compile e with debugging >>>>>>>>>>>>>>>>> symbols, >>>>>>>>>>>>>>>>> see >>>>>>>>>>>>>>>>> our wiki). Then break on _e_randr_crtc_info_set and step >>>>>>>>>>>>>>>>> through >>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>> function until bad things (crash) happens. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Will do and let you know what I find here. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ok, I installed gdb, downloaded the latest 66482 from svn. >>>>>>>>>>>>>>> Followed >>>>>>>>>>>>>>> the wiki >>>>>>>>>>>>>>> and rebuilt the EFLs after export CFLAG=-g. Now I'm stuck. From >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> wiki it >>>>>>>>>>>>>>> seems that I should start e, then when it crashes start gdb and >>>>>>>>>>>>>>> break >>>>>>>>>>>>>>> on >>>>>>>>>>>>>>> _e_randr_crtc_info_set. Not sure how to do that. Help >>>>>>>>>>>>>>> appreciated. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Dec 23, 2011, at 9:41 PM, Carsten Haitzler (The Rasterman) >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> you're going to need to start an xserver raw without any "gdm". >>>>>>>>>>>>>> >>>>>>>>>>>>>> Xorg -ac :1 & >>>>>>>>>>>>>> >>>>>>>>>>>>>> run that in a text console somewhere. >>>>>>>>>>>>>> in another text console do: >>>>>>>>>>>>>> >>>>>>>>>>>>>> export E_START=1 >>>>>>>>>>>>>> gdb enlightenment >>>>>>>>>>>> >>>>>>>>>>>> Thanks to raster for helping out here :-) >>>>>>>>>>>> But shouldn't this be >>>>>>>>>>>> gdb enlightenment_start instead? >>>>>>>>>>>>>> >>>>>>>>>>>>>> br _e_randr_crtc_info_set >>>>>>>>>>>>>> r >>>>>>>>>>>>>> >>>>>>>>>>>>>>> But, e never crashes though. What happens is that I'll run >>>>>>>>>>>>>>> startx >>>>>>>>>>>>>>> from vt1, >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> it won't - you have to make it STOP when it hits that function >>>>>>>>>>>>>> with a >>>>>>>>>>>>>> breakpoint (br). you have to set it up before e starts like >>>>>>>>>>>>>> above. >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks! Attached are three sequential console shots, after >>>>>>>>>>>>> hitting the >>>>>>>>>>>>> breakpoint three times . These seem to look exactly the messages >>>>>>>>>>>>> I saw >>>>>>>>>>>>> earlier. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Sadly you did something wrong when trying to run e via gdb. Ecore_X >>>>>>>>>>>> fails to initialize, which is way before e_randr initialization. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>> and then in vt1 there are a series of messages like I included >>>>>>>>>>>>>>> earlier in the >>>>>>>>>>>>>>> file called "start-results". The messages say "Enlightenment >>>>>>>>>>>>>>> relocation >>>>>>>>>>>>>>> handling", then many ESTART messages, then "Enlighenment >>>>>>>>>>>>>>> relocation >>>>>>>>>>>>>>> handling" >>>>>>>>>>>>>>> again, followed by the same ESTART messages, then >>>>>>>>>>>>>>> "<Enlightenment >>>>>>>>>>>>>>> Error> A >>>>>>>>>>>>>>> previous instance of Enlightenment is still active on this >>>>>>>>>>>>>>> screen. >>>>>>>>>>>>>>> Aborting >>>>>>>>>>>>>>> startup." And then it repeats this process over and over until >>>>>>>>>>>>>>> there's a >>>>>>>>>>>>>>> final error and X shuts down. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So there doesn't seem to be a PID of enlightenment to run gdb >>>>>>>>>>>>>>> on. I >>>>>>>>>>>>>>> guess. >>>>>>>>>>>>>>> I've never really run gdb before. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Any suggestions/hints would be appreciated, I'm willing to try >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> help track >>>>>>>>>>>>>>> down the problem with this damn ATI hardware. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> mike >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Dec 23, 2011, at 3:52 AM, Andrea Suisani wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi all, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> sorry for not being able to join >>>>>>>>>>>>>>>>>>> the irc debug session last evening... >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> though it seems we have have narrowed >>>>>>>>>>>>>>>>>>> the problem down to a peculiar comibination >>>>>>>>>>>>>>>>>>> of HW (ATI HD 5770/5750), e17 ver, >>>>>>>>>>>>>>>>>>> xorg version and x org drivere version. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> just trying get a more clear picture >>>>>>>>>>>>>>>>>>> I'm running X.Org X Server 1.10.4 >>>>>>>>>>>>>>>>>>> with fglrx used as video driver (defined >>>>>>>>>>>>>>>>>>> in xorg.conf) installed using >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> apt-get install fglrx-updates >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> on an ubuntu box ver 11.10, that's >>>>>>>>>>>>>>>>>>> the output of uname -a: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Linux suino 3.0.0-14-server #23-Ubuntu SMP Mon Nov 21 >>>>>>>>>>>>>>>>>>> 20:49:05 >>>>>>>>>>>>>>>>>>> UTC 2011 >>>>>>>>>>>>>>>>>>> x86_64 x86_64 x86_64 GNU/Linux >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Mike what's your xorg version and >>>>>>>>>>>>>>>>>>> which driver are you using for your >>>>>>>>>>>>>>>>>>> 5770? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I'm going to try to configure my Xorg >>>>>>>>>>>>>>>>>>> dropping the binary only driver and using >>>>>>>>>>>>>>>>>>> instead the one provided by: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> xserver-xorg-video-radeon >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> i.e. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> http://www.x.org/wiki/radeon >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I'll report back >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Andrea >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On 12/22/2011 08:49 PM, mh wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Leif, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Following up on our irc session today: I >>>>>>>>>>>>>>>>>>>> deleted /opt/e17/lib/enlightenment/conf_randr and >>>>>>>>>>>>>>>>>>>> restarted e. >>>>>>>>>>>>>>>>>>>> Still >>>>>>>>>>>>>>>>>>>> had the black screen with gkrellm. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Decided to try something else: I took the 5770 video card >>>>>>>>>>>>>>>>>>>> out >>>>>>>>>>>>>>>>>>>> of the >>>>>>>>>>>>>>>>>>>> box and tried the onboard video, which is a Radeon HD 4200. >>>>>>>>>>>>>>>>>>>> Restarted >>>>>>>>>>>>>>>>>>>> e, and the display worked properly. Recompiled e to rev >>>>>>>>>>>>>>>>>>>> 66466, >>>>>>>>>>>>>>>>>>>> and it >>>>>>>>>>>>>>>>>>>> worked fine. Shutdown, the reinstalled the Radeon HD 5770 >>>>>>>>>>>>>>>>>>>> based >>>>>>>>>>>>>>>>>>>> video >>>>>>>>>>>>>>>>>>>> card and restarted, back to a black display with gkrellm >>>>>>>>>>>>>>>>>>>> still >>>>>>>>>>>>>>>>>>>> working. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> So, from there I went back to the vt and recompiled e from >>>>>>>>>>>>>>>>>>>> v. >>>>>>>>>>>>>>>>>>>> 66218 and >>>>>>>>>>>>>>>>>>>> restarted e. Display and system worked fine. So that's >>>>>>>>>>>>>>>>>>>> where I'm >>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>> right now. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> mike >>>>> >>>>> >>>>> >>>>> -- >>>>> Leif >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Keep Your Developer Skills Current with LearnDevNow! >>>>> The most comprehensive online learning library for Microsoft developers >>>>> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, >>>>> Metro Style Apps, more. Free future releases when you subscribe now! >>>>> http://p.sf.net/sfu/learndevnow-d2d >>>>> _______________________________________________ >>>>> enlightenment-devel mailing list >>>>> [email protected] >>>>> https://lists.sourceforge.net/lists/listinfo/enlightenment-devel >>>> >>>> >>> >>> >>> >>> -- >>> Leif >>> >>> ------------------------------------------------------------------------------ >>> Keep Your Developer Skills Current with LearnDevNow! >>> The most comprehensive online learning library for Microsoft developers >>> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, >>> Metro Style Apps, more. Free future releases when you subscribe now! >>> http://p.sf.net/sfu/learndevnow-d2d >>> _______________________________________________ >>> enlightenment-devel mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/enlightenment-devel >> >> >> ------------------------------------------------------------------------------ >> Keep Your Developer Skills Current with LearnDevNow! >> The most comprehensive online learning library for Microsoft developers >> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, >> Metro Style Apps, more. Free future releases when you subscribe now! >> http://p.sf.net/sfu/learndevnow-d2d >> _______________________________________________ >> enlightenment-devel mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/enlightenment-devel >> > > > > -- > Leif > > ------------------------------------------------------------------------------ > Keep Your Developer Skills Current with LearnDevNow! > The most comprehensive online learning library for Microsoft developers > is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, > Metro Style Apps, more. Free future releases when you subscribe now! > http://p.sf.net/sfu/learndevnow-d2d > _______________________________________________ > enlightenment-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/enlightenment-devel ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ enlightenment-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
