Carsten Haitzler <ras...@rasterman.com> писал(а) в своём письме Mon, 09 Sep
2013 01:46:31 +0200:
> On Sun, 08 Sep 2013 20:58:38 +0200 "Vadim Efimov" <eva...@evadim.ru> said:
>
> do you have a /proc/acpi/SOMETHING.... that tells you tablet state? (use find
> -
> it may be in a subdir somewhere)? what states does it support open/closed?
> on/off?
>
Seems, nothing in /proc/acpi, but I'll try to find something relevant
according to udev rules from MagickRotation, manufacturers make it in different
ways:
SUBSYSTEM=="input", ATTRS{name}=="HP WMI hotkeys", MODE="640", GROUP="magick",
SYMLINK="input/magick-rotation"
SUBSYSTEM=="input", ATTRS{name}=="Dell WMI hotkeys", MODE="640",
GROUP="magick", SYMLINK="input/magick-rotation"
SUBSYSTEM=="input", ATTRS{name}=="ThinkPad Extra Buttons", MODE="640",
GROUP="magick", SYMLINK="input/magick-rotation"
SUBSYSTEM=="input", ATTRS{name}=="Fujitsu FUJ02B[DF]", MODE="640",
GROUP="magick", SYMLINK="input/magick-rotation"
Yes, cat device show reaction only 2 times - seems tabled mode "on" and "off"
Also, after your commit it start work, but you need to swap names = 1 = on 0 =
off
Thanks a lot for your work!
>> Carsten Haitzler <ras...@rasterman.com> писал(а) в своём письме Fri, 12 Jul
>> 2013 08:50:35 +0200:
>>
>> > On Sun, 16 Jun 2013 10:14:29 +0200 "Vadim Efimov" <eva...@evadim.ru> said:
>> >
>> >> Carsten Haitzler <ras...@rasterman.com> писал(а) в своём письме Sun, 16
>> >> Jun
>> >> 2013 03:39:56 +0200:
>> >>
>> >> > On Sat, 15 Jun 2013 19:55:06 +0200 "Vadim Efimov" <eva...@evadim.ru>
>> >> > said:
>> >> >
>> >> >> Michael Blumenkrantz <michael.blumenkra...@gmail.com> писал(а) в своём
>> >> >> письме Tue, 11 Jun 2013 11:55:23 +0200:
>> >> >>
>> >> >> > The old thread was too long for me to see if I fixed everything, so
>> >> >> > post here if you have a bug that's present using the latest revision.
>> >> >>
>> >> >> 1) Can't add some new signals not via ACPI Bindings nor via Key
>> >> >> Bindings, but they visible via acpi_listen:
>> >> >>
>> >> >> video/tabletmode TBLT on K
>> >> >> video/tabletmode TBLT off K
>> >> >
>> >> > i just added support in e_acpi.c for these kind of acpi events. it
>> >> > needed a whole new bit of logic to deal with them. untested as only you
>> >> > have that hardware. :) you'll need to test and get back to me. :)
>> >> >
>> >>
>> >> Hm, still no reaction. I just recompile E and try. Maybe I miss something?
>> >
>> > well i added them and relevant code... see e_acpi.c - as i dont have your
>> > hw, i can't test that. can you do the digging and find out? look for
>> > _devices_simple_state.
>> >
>>
>> Hello,
>>
>> Long time ago, in another galaxy, somebody asked about talet support... :-D
>> Anyway, better later than never. Today I finally figure out whole damn story
>> about tablet acpi event:
>>
>> — Special software (like MagickRotate) detect tablet status from hardware
>> itself (by polling something) and do some actions - rotate screen, etc...
>>
>> — To acpid 2.0.17 added new event - video/tabletmode TBLT
>>
>> — xorg server start crashed every time then event received - unfortunately
>> acpid devs make it malformed, and xorg devs didn't filter events from acpid.
>> Fixed in xorg-server 1.14
>>
>> — in acpid 2.0.18 devs fix tablet event, so, software start recognize it:
>> changed from
>> video/tabletmode TBLT on K
>> video/tabletmode TBLT off K
>> to more standard
>> video/tabletmode TBLT 0000008A 00000001 K
>> video/tabletmode TBLT 0000008A 00000000 K
>>
>> So, I try to do some research in e_acpi.c , but as I'm not a coder, just add
>>
>> {"video/tabletmode", E_ACPI_TYPE_TABLET},
>>
>> in line 79, to
>>
>> E_ACPI_Device_Simple _devices_simple[] =
>>
>> comment lines about it in
>>
>> E_ACPI_Device_Simple_State _devices_simple_state[] =
>>
>> and change one line in e_acpi.h to E_ACPI_TYPE_TABLET
>>
>> Now I can add an "unknown" acpi event into acpi bindings dialog - woohoo!
>>
>> As of the original idea of switching E's profiles switch via rotate screen
>> still unsuccessful. I can't figure out what to assign to event. Binding
>> "run command" didn't work, and then I add second, command in first one wiped.
>>
>> Which module produce config "e_randr.cfg" ? If I switch profiles from xterm
>> via enlightenment_remote -default-profile-set mobile
>> enlightenment_remote -default-profile-set standard
>> sometimes after switch I see black screen, and seems E crashed. I can sun E
>> successfully only after remove e_randr.cfg* files.
>>
>> If I insert commands to switch E profiles to magick rotate, X crashed and
>> I see kdm screen. magick rotate can run command before and after rotate,
>> and I see first thing - switch profile or rotate screen works fine, but
>> second action - rotate screen or switch profile crash X. After that, some
>> times I have to remove e_randr configs to start normally.
>>
>> I update EFL+E today.
>>
>> Have a nice day, Vadim
>>
>> >> >> these I'm able to add via Key Bindings:
>> >> >>
>> >> >> button/zoom ZOOM 00000080 00000000 K
>> >> >> button/screenlock SCRNLCK 00000080 00000000 K
>> >> >> button/battery BAT 00000080 00000000 K
>> >> >
>> >> > i also stuffed these in. again - untested. :)
>> >> >
>> >> and these 3 works...
>> >>
>> >> >> In fact, I have convertible tablet and want to setup switching to
>> >> >> another(kind of "tablet") profile, then convert to/from tablet mode.
>> >>
>> >> ------------------------------------------------------------------------------
>> >> This SF.net email is sponsored by Windows:
>> >>
>> >> Build for Windows Store.
>> >>
>> >> http://p.sf.net/sfu/windows-dev2dev
>> >> _______________________________________________
>> >> enlightenment-devel mailing list
>> >> enlightenment-devel@lists.sourceforge.net
>> >> https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
>> >
>>
>> ------------------------------------------------------------------------------
>> Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
>> Discover the easy way to master current and previous Microsoft technologies
>> and advance your career. Get an incredible 1,500+ hours of step-by-step
>> tutorial videos with LearnDevNow. Subscribe today and save!
>> http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk
>> _______________________________________________
>> enlightenment-devel mailing list
>> enlightenment-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
>
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk
_______________________________________________
enlightenment-devel mailing list
enlightenment-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
