Hi folks, We currently have a few sites with using Cisco's voip. The remote sites use Cisco 26xx routers and all connect via point to point T1s to a Cisco 47xx router for both data and voip. The data and voip are on different subnets and dynamically vlanned on the Cisco.
We are moving to an Embarq Metro ethernet solution. We will then have a multipoint to point configuration with the remote sites (voip and non-voip) coming into a XSR3250. The voip traffic will still need to go the Cisco 47xx router for the call managers and some custom configuration requirements. I'm wondering how I configure the 3250 to point only the viop traffic to the Cisco. On the return side, with voip traffic coming from the 47xx I can just point back to the 3250 and static route the voip subnets on the 3250. Thanks. Jim Jim Huddle, MCNE, CNE, CBS, GCIH, GSEC, Project +, MSCE Network Engineer Osceola County BOCC v: 407-742-5837 c: 407-908-8408 ________________________________ Please Note: Florida has a very broad Public Records Law. E-mails to this entity or its employees may be considered a public record. Your e-mail communication, including your email address may be disclosed to the public and media at any time. --- To unsubscribe from enterasys, send email to [EMAIL PROTECTED] with the body: unsubscribe enterasys [EMAIL PROTECTED]
