Hi Fritz!
I wrote a shell (bash) script that uses ATG Tools (cliConfig) to log in
to our C2s. Is that close enough for you?
The heart of it is:
cliConfig -l $LIST -telnetUser $USER -telnetPwd $PASSWD -c $CMDFILE |
grep -e ^1 -e "Fan2" -A 2 | grep -e "Operating" -B 6 | grep ^1
(Those grep ^1 passes catch all of the IP addresses we use. You may
want to modify them to catch any line starting with a number!!! I just
took a quick-n-dirty shortcut for my environment.) The CMDFILE is:
show sys
exit
So the first grep pipe picks up the IP address and the line about fans
ie "Fan2" and also includes 2 lines after the match. Next grep pipeline
looks for "Operating" and includes 6 lines before the match. What's
left is IP addresses and bad fan messages, so I pull out just the IP
addresses. I recommend trying this a few times for yourself to see if I
have a glaring omission. On the other hand, my script just caught two
switches on this week's run so it does something.
- Joni
Fritz Buetikofer wrote:
Hi
In the past week we have experienced a few outages due to fan failures
of secure stack systems, where in one case we've seen syslog messages
alarming us on the critical event but in the other cases we have not see
any alarms. This is an old issue, which I have with Enterasys and I have
already opened an enhancement request for adding the power-supply and
fan status to the private mib in 2007. But as the realization of this ER
is not
yet done, I have severe problems with secure stack systems where the fans
fail.
So my question is, who out in Enterasys land has written a perl script
to connect thru the CLI to secure stacks and read out the power supply
and fan status of the system ?
Thank you and best regards,
--Fritz.
___________________________
University of Bern
Computer Services Department
Fritz Buetikofer
Senior IT Manager
Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel. +41 (0)31 631 3843
Fax. +41 (0)31 631 3865
Web. http://www.id.unibe.ch
---
To unsubscribe from enterasys, send email to [EMAIL PROTECTED] with the body:
unsubscribe enterasys [EMAIL PROTECTED]
