Hi hugo, If you use routing in the g3, disable icmp redirects. Regards rene
----------------------------------------------------------------------------------- Message sent by ENTIRETEC ¦ Dresden, Dubai, Pfäffikon/SZ, Kuala Lumpur, Riga *** This email is for the exclusive use of the addressed. If you have received this message in error, please notify the sender by email immediately and delete the message from your computer without making any copies. Thank you. *** ----- Originalnachricht ----- Von: Hugo Veiga <[email protected]> An: Enterasys Customer Mailing List <[email protected]> Gesendet: Sat Feb 14 00:29:38 2009 Betreff: [enterasys] G3G124-24 Hi, We are testing G3G124-24 and the cpu values are incredibly high (68% and higher). The equipment as almost no traffic and only a few ports connected. We tested with no ports connected (only the console) and there were cpu values of 20% and more. Has any one found the same problem? I really need feedback otherwise we will not buy it. Regards, Hugo Veiga -------------------- G3(su)->show system utilization cpu CPU Utilization Threshold Traps enable: Threshold = 80.0% Total CPU Utilization: Switch CPU 5 sec 1 min 5 min ------------------------------------------------- 1 1 68% 68% 68% G3(su)->show system utilization cpu CPU Utilization Threshold Traps enable: Threshold = 80.0% Total CPU Utilization: Switch CPU 5 sec 1 min 5 min ------------------------------------------------- 1 1 66% 67% 67% G3(su)->show system utilization cpu CPU Utilization Threshold Traps enable: Threshold = 80.0% Total CPU Utilization: Switch CPU 5 sec 1 min 5 min ------------------------------------------------- 1 1 70% 67% 67% G3(su)->show system utilization CPU Utilization Threshold Traps enable: Threshold = 80.0% Total CPU Utilization: Switch CPU 5 sec 1 min 5 min ------------------------------------------------- 1 1 74% 69% 69% Switch:1 CPU:1 TID Name 5Sec 1Min 5Min ---------------------------------------------------------- 99ddc40 tcdpSendTask 0.00% 0.02% 0.02% a716818 ARP Timer 0.00% 0.12% 0.04% a81dd00 tArpCallback 0.00% 0.19% 0.12% a9dcfa8 ipMapForwardingTask 46.80% 46.10% 47.36% aaeb400 dot3ad_lac_task 0.00% 0.00% 0.00% b0fab48 dot1s_task 0.00% 0.00% 0.01% b10ad58 dot1s_timer_task 0.40% 0.06% 0.02% bba4dc8 RMONTask 1.60% 0.39% 0.28% bbe5928 SNMPTask 2.80% 0.83% 0.33% bcb3ed0 EDB BXS Resp 0.00% 0.02% 0.04% c745048 hapiRxTask 4.00% 3.80% 3.00% d3312e0 lvl7TaskUtilMonitorTas 0.40% 0.40% 0.40% df2cd88 bcmLINK.2 0.80% 0.26% 0.34% df31060 bcmLINK.1 0.00% 0.10% 0.17% df35338 bcmLINK.0 0.00% 0.01% 0.02% e6f5eb0 MAC Age Task 0.40% 0.17% 0.14% e9c72c8 bcmRX 5.60% 5.35% 5.84% ea689b0 bcmCNTR.2 0.40% 0.31% 0.22% eadd130 bcmL2X.2 0.00% 1.63% 2.54% f33a610 bcmCNTR.1 0.00% 0.19% 0.15% f3a2d70 bcmL2X.1 5.20% 4.26% 2.76% f3f43e8 bcmTX 5.20% 4.91% 5.19% f409230 bcmCNTR.0 0.40% 0.25% 0.18% f449d60 bcmL2X.0 0.00% 0.04% 0.01% Storage Utilization: Type Description Size(Kb) Available (Kb) --------------------------------------------------------------- RAM RAM device 262140 107848 Flash Images, Config, Other 31484 13748 G3(su)->show system hardware SLOT 1 HARDWARE INFORMATION --------------------------- Model: G3G124-24 Serial Number: 08461082905C Vendor ID: 0xbc00 Base MAC Address: 00:1F:45:1A:05:2E Hardware Version: BCM56514 REV 1 FirmWare Version: 01.02.03.0010 Boot Code Version: 01.00.46 SLOT 2 HARDWARE INFORMATION --------------------------- Model: G3G-24SFP Serial Number: 08260122905B Vendor ID: 0xbc00 Base MAC Address: 00:1F:45:1A:05:2E Hardware Version: BCM56512 REV 1 FirmWare Version: 01.02.03.0010 Boot Code Version: 01.00.46 SLOT 3 HARDWARE INFORMATION --------------------------- Slot is not present. SLOT 4 HARDWARE INFORMATION --------------------------- Slot is not present. POWER SUPPLY 2 HARDWARE INFORMATION ----------------------------------- Model: 1498 Serial Number: 002808 Wattage: 400 Software Version: A109 Revision: A1 UBI amiga do ambiente: Antes de imprimir este e-mail pense bem se tem mesmo que o fazer. As árvores são um bem imprescindível. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
