I can't remember the exact commands and I'm not where I can look at the moment, but first you need to create an interface for the VLAN something like set vlan interface 116 and it will create a interface vlan.0.116. You can see them with a show vlan interface Then you mirror that interface to your mirror port with something like set port mirror create vlan.0.116 DestinationPort
I think my firmware is a little older than you have here so it may have changed. You are probably getting an error because you did not create the interface first. At least that was the issue I had a while back with this. Thanks Bruce Hopkins 770-528-4574 Director Information Systems Chattahoochee Technical College http://www.chattcollege.com [cid:[email protected]]<http://mvp.support.microsoft.com/> From: Ravi Kanagasabapathy [mailto:[email protected]] Sent: Wednesday, February 25, 2009 1:19 PM To: Enterasys Customer Mailing List Subject: [enterasys] Mirroring vlan on N7 with DFE Hello Could anyone please give me the commands to mirror a vlan on the Matrix N7 router switch with 6.12.01.007 Firmware version? Thanks in advance for your help. Thanks Ravi K Senior Information Systems Engineer Health Protection Agency Colindale Tel: 0208 327 7777 * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected] ________________________________ ************************************************************************** The information contained in the EMail and any attachments is confidential and intended solely and for the attention and use of the named addressee(s). It may not be disclosed to any other person without the express authority of the HPA, or the intended recipient, or both. If you are not the intended recipient, you must not disclose, copy, distribute or retain this message or any part of it. This footnote also confirms that this EMail has been swept for computer viruses, but please re-sweep any attachments before opening or saving. HTTP://www.HPA.org.uk ************************************************************************** * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
<<inline: image001.png>>
