Just setup multicast on my N's not sure how different the XSR and WAN will be.
Here is what I was told to do:
Below are the commands for the DFE that you need to enable IGMP
>set igmp enable 1 ( enables IGMP on the specific vlans)
set igmp query-enable 1 ( This enables the DFE as the IGMP querier)
You need to enable this on the vlan you want for the RBT wireless users
For the A2 the commands are as follows
set igmpsnooping adminmode {enable | disable}
set igmpsnooping interfacemode port-string {enable | disable}
Thanks
Reese
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, May 19, 2009 1:17 AM
To: Enterasys Customer Mailing List
Subject: RE:[enterasys] Multicast Setup
This email is to be read subject to the disclaimer below.
Has anyone setup Multicast? Need to find some examples between an XSR router
at the edge talking to N7's and XSR's across a WAN.
--------------------
NOTICE - This communication contains information which is confidential and the
copyright of Ernst & Young or a third party.
If you are not the intended recipient of this communication please delete and
destroy all copies and telephone Ernst & Young on 1800 655 717 immediately. If
you are the intended recipient of this communication you should not copy,
disclose or distribute this communication without the authority of Ernst &
Young.
Any views expressed in this Communication are those of the individual sender,
except where the sender specifically states them to be the views of Ernst &
Young.
Except as required at law, Ernst & Young does not represent, warrant and/or
guarantee that the integrity of this communication has been maintained nor that
the communication is free of errors, virus, interception or interference.
Our liability is limited by a scheme approved under professional standards
legislation, except where we are a financial services licensee.
--------------------
If this communication is a "commercial electronic message" (as defined in the
Spam Act 2003) and you do not wish to receive communications such as this,
please forward this communication to [email protected]
* --To unsubscribe from enterasys, send email to
[email protected]<mailto:[email protected]> with the body: unsubscribe enterasys
[email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
