Using the Password Reset Button If you forget the D2 switch login password, use the Reset button to reset the password to the default value as described in the following procedure. To reset the D2 switch password: 1. Locate the reset button on the back of the switch as shown in Figure 1���1 on page�����2. 2. Pre�����a�����hold the reset button while the switch is operational. This changes the login password to the default password and will be indicated by means of the command line interface (CLI) only. 3. You can now logon to the switch through the console port using the default password, and assign a new password using the CLI. 4. To access switch management from your local PC, terminal, or modem connection, refer to the Enterasys ����Series CLI Reference for instructions on how to log in and enter a new password.
http://secure.enterasys.com/support/manuals/compress.cgi/hardware/9034395-02_D2-HIG.pdf.zip -----Original Message----- From: gerardgil...@yahoo.ie [mailto:gerardgil...@yahoo.ie] Sent: Thursday, June 04, 2009 15:23 To: Enterasys Customer Mailing List Subject: [enterasys] Resetting Password on a D2 Switch I've forgotten the password I put on the admin (SU) on A D2 switch (at least what I thought I used doesn't work). Is there any way to reset the password back to the default without losing any of the configuration or other settings? Hope you can help! regards, Ger Gillen Send instant messages to your online friends http://uk.messenger.yahoo.com --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys lev.boksht...@enterasys.com --- To unsubscribe from enterasys, send email to lists...@unc.edu with the body: unsubscribe enterasys arch...@mail-archive.com
