Javed You have asked a lot in a simple question. I suggest you download the ssr manuals.
ssr code is like this enter config mode from enable mode - all commands are edited in the command mode line editor. to create vlans vlan create Vlan-name ip id Vlan-id (example vlan create Vlanip ip id 3) to add ports to a vlan as an access port vlan add ports et.7.1 to Vlanip to add ports to a vlan as a trun port vlan make trunk-port et.7.3 vlan add ports et.7.3 to Vlanip to set up a routing interface interface create ip Ilanip address-netmask 10.16.244.252/28 vlan Vlanip Use the show command, and the command lines will display with a line number. To delete a command type negate line-number to see what you have added or deleted, type show scratchpad The ssr series are extremely capable, hence complex, switch-routers. It isn't really possible to learn to use them from an email forum. Billo Data Communications Co-Ordinator Information Technology & Telecommunications Hunter New England Health Service ph 0249 213804 fax 0249 213038 [email protected] >>> Javed Khan <[email protected]> Tuesday, 16 June 2009 >>> Dear Friends, Please let know how to create/delete Vlans, add/remove ports from vlan and do inter-Vlan routing on SSR 8000. Regards, Javed. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
