Garry, The context applies to the router ARP data. The MIB that you want is dot1qPortVlanTable.
Regards, Phillip McClure Principal Solutions Architect McClure Technologies -----Original Message----- From: garry crothers <[email protected]> Sent: Friday, July 03, 2009 11:35 To: Enterasys Customer Mailing List <[email protected]> Subject: Re: [enterasys] VLAN Mibs Phillip it is the VLAN to port mapping information that I am trying to obtain. I am already picking up the mac tables o.k so I must have the snmp community context's configured o.k. I am beginning to think I may be using the wrong mib numbering. garry Phillip McClure wrote: > Garry, > > One slight correction: > > If it is VLAN to port mapping that should be available from the > dot1qPortVlanTable MIB branch which is part of the dot1qVlan > MIB branch. > > > Regards, > > Phillip McClure > > Phillip McClure, ESE,CCDA > Principal Solutions Architect > > McClure Technologies LLC > Mobile: 401-487-0911 | Fax: 425-984-9271 > E-Mail: [email protected] > > > -----Original Message----- > From: Phillip McClure [mailto:[email protected]] > Sent: Friday, July 03, 2009 9:06 AM > To: Enterasys Customer Mailing List > Subject: RE: [enterasys] VLAN Mibs > > Garry, > > To the best of my knowledge there isn't a command to active or deactivate > MIBs on the DFEs. The only special considerations that I'm aware of is in > pre 6.x code, you need to setup SNMP Users/Communities with the appropriate > router context so that you can access the router related MIBs. You'll need > to do this if you want to gather ARP (ipNetToMediaTable) data from a DFE > routing module running pre 6.x code. For example: > > set snmp access groupRTR.1 security-model v1 context router1 exact read All > set snmp access groupRTR.2 security-model v1 context router2 exact read All > set snmp community Myrouter.1 context router1 > set snmp community Myrouter.2 context router2 > set snmp group groupRTR.1 user Myrouter.1 security-model v1 > set snmp group groupRTR.2 user Myrouter.2 security-model v1 > > > In the example, context router1 equates to a router module in slot 1, while > context router2 equates to a router module in slot 2. > > What information are you trying to glean from the MIB? > > If it is MAC to port mapping that will be in the dot1dTp and/or dot1qTp MIB > branches. > The dot1dTp branch is not VLAN/multiple Forwarding Database (FDb) > aware, while the dot1qTp branch does include FDb information. > If it is VLAN to port mapping that should be available from the dot1qVlan > MIB branch. > If it is VLAN ID to name mapping that should be available in the > dot1qVlanStaticTable MIB branch. > > I hope that this helps you get this working. If you are able to get it > working would you be kind enough to post a how-to for anyone else on the > list interested in doing the same thing? > > Thanks! > > Regards, > > Phillip McClure > > Phillip McClure, ESE,CCDA > Principal Solutions Architect > > McClure Technologies LLC > Mobile: 401-487-0911 | Fax: 425-984-9271 > E-Mail: [email protected] > > > -----Original Message----- > From: Garry Crothers [mailto:[email protected]] > Sent: Friday, July 03, 2009 8:04 AM > To: Enterasys Customer Mailing List > Subject: [enterasys] VLAN Mibs > > i am trying to get Cacti with Mactrack plugin working with Enterasys N1 > N3 N7 DFE Gold and platinum blades. > > The OID for the etsysVlanInterfaceMIB is 1.3.6.1.4.1.5624.1.2.22 if I do > an snmp walk from here or use GETIF to browse the mib tables I dont seem > to see any details > > > Does anyone know if this mib table needs to be enable on the switches by > some mechanism, or am I using the wrong mib number > > hardware verision details > 1 7G4282-49 08085977635F Hw: 1 > Bp: 01.00.19 > Fw: 05.42.04 > > regards > garry crothers > > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] -- Regards Mr.Garry Crothers MSc, MBCS Senior Network Engineer +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Information Services | [email protected] | Queens University Belfast | University Road, | Belfast, | Telephone: +44 (0)28 9097 6092 BT7 1NN | N.Ireland | Facsimile: +44 (0)28 9097 6112 --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
