Hello, Hopefully quick question: We have a few C3 switches and a large number of D2 switches that we would like to configure to use VLANs and multicast routing. The problem is that in our initial tests using just two C3 switches and one host attached to each, the multicast was only seen by both if the two were on the same VLAN. In this situation, one host would send out multicast and the other would listen. If we put the hosts on different VLANs the multicast was no longer seen (the listening host never hears the broadcast according to wireshark), despite the C3s being setup to send the multicast out the correct ports. Do the C3 switches lack the capability to route IGMP traffic between VLANs or am I missing some configuration step?
Thank you, Victoir Veibell --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
