Hi Volker
Thanks a lot
I now have identical tags between the switch and the RBT.
However, after tagging vlan 1 on both sides (both the switch and the
RBT) I lose connectivity so I have untagged both sides, connectivity
restored but I���m back to square one.
Any suggestions would be greatly appreciated
*From:* Volker Kull [mailto:[email protected]]
*Sent:* Wednesday, August 26, 2009 12:04 PM
*To:* Enterasys Customer Mailing List
*Subject:* AW: [enterasys] RBT-8500
Hi Connie !
You have configured VLAN1 untagged and VLAN100 tagged (TAG=1) at port
1 on RBT. Do you have these configuration on the switch as well ? I
think not because you tag the VLAN100 at RBT with 1 and on Switch with
100 !!!
Try to tag all VLANs (1+100) at RBT and Switch uplink to RBT with
identical tags.
viele ��e
Volker Kull
G��äftsstellenleiter d
*BELL Computer-Netzwerke GmbH
*Ohmstr. 6 - 76229 Karlsruhe - Germany
Tel: +49 (0) 721 6624993-0
Fax: +49 (0) 721 6624993-30
e-mail [email protected] <blocked::mailto:[email protected]>
web www.bell.de <blocked::http://www.bell.de/>
BELL
Geschaeftsfuehrer: Dipl. Ing. Tobias Groene
Sitz der Gesellschaft: Bonn, HRB 6444 Amtsgericht Bonn
*******************************************************************************************************************
Diese E-Mail kann vertrauliche Informationen enthalten. Wenn Sie nicht
der richtige Adressat sind,
informieren Sie bitte sofort den Absender und vernichten Sie diese
Mail. Das unerlaubte Kopieren
sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
This e-mail may contain confidential information. If you are not the
intended recipient please notify
the sender immediately and destroy this e-mail. Any unauthorised
copying, disclosure or distribution
of this e-mail`s content is strictly forbidden.
*****************************************************************************************************************
*Von:* Connie Mkhize [mailto:[email protected]]
*Gesendet:* Mittwoch, 26. August 2009 11:37
*An:* Enterasys Customer Mailing List
*Betreff:* RE: [enterasys] RBT-8500
Please see configs attached.
Ok Alex, will give it a try.
*From:* Volker Kull [mailto:[email protected]]
*Sent:* Wednesday, August 26, 2009 11:00 AM
*To:* Enterasys Customer Mailing List
*Subject:* AW: [enterasys] RBT-8500
Hi Connie !
Please send us the config of the RBT and DHCP/Routing (switches).
Kind regards
viele Ge
Volker Kull
Gescftsstellenleiter Sd
*BELL Computer-Netzwerke GmbH
*Ohmstr. 6 - 76229 Karlsruhe - Germany
Tel: +49 (0) 721 6624993-0
Fax: +49 (0) 721 6624993-30
e-mail [email protected] <blocked::mailto:[email protected]>
web www.bell.de <blocked::http://www.bell.de/>
BELL
Geschaeftsfuehrer: Dipl. Ing. Tobias Groene
Sitz der Gesellschaft: Bonn, HRB 6444 Amtsgericht Bonn
*******************************************************************************************************************
Diese E-Mail kann vertrauliche Informationen enthalten. Wenn Sie nicht
der richtige Adressat sind,
informieren Sie bitte sofort den Absender und vernichten Sie diese
Mail. Das unerlaubte Kopieren
sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
This e-mail may contain confidential information. If you are not the
intended recipient please notify
the sender immediately and destroy this e-mail. Any unauthorised
copying, disclosure or distribution
of this e-mail`s content is strictly forbidden.
*****************************************************************************************************************
*Von:* Connie Mkhize [mailto:[email protected]]
*Gesendet:* Mittwoch, 26. August 2009 10:53
*An:* Enterasys Customer Mailing List
*Betreff:* RE: [enterasys] RBT-8500
Thanks for your response Alex
Ive set it up in the lab to practice before the deployment.
So it is just 1 C2 switch connecting to the C3 which connects directly
to the controller.
Im not sure if thats the info you are looking for.
Regards
Connie
*From:* Eichholz, Alexander [mailto:[email protected]]
*Sent:* Wednesday, August 26, 2009 10:45 AM
*To:* Enterasys Customer Mailing List
*Subject:* AW: [enterasys] RBT-8500
Do you have l2 or l3 connection betwee ap and controler?
The first connect should be l2.
Alex
--------------------------
Alexander Eichholz
Enterasys Networks
+49 172 - 663 99 40
+49 69 - 478 60 0
[email protected]
Gesendet mit BlackBerry-E-Mail
There is nothing more important than our customer!
Enterasys Networks Germany GmbH
Amtsgericht: 60313 Frankfurt am Main (HRB56672)
This email may contain confidential and privileged material for the
sole use of the intended recipient. Any review or distribution by
others is strictly prohibited. If you are not the intended recipient,
please contact the sender and delete all copies.
*Von*: Connie Mkhize
*An*: Enterasys Customer Mailing List
*Gesendet*: Wed Aug 26 04:41:07 2009
*Betreff*: [enterasys] RBT-8500
Hi all
I was wondering if anyone has worked on the RBT-8500 controller or
similar equipment before, if so please assist.
The switches are configured and can communicate with the RBT-8500.
We are running the wireless DHCP pool on our C3G switch. Our DHCP Pool
allocates IP addresses to the APs successfully but we cannot get the
APs to communicate with the RBT-8500 even after setting the 43 rule .
I used the quick guide for direction with the configurations.
I'm not sure what I am missing.
Please advise.
Your assistance would be highly appreciated.
Regards
Connie
The information contained in this message and or attachments is
intended only for the person or entity to which it is addressed and
may contain confidential and/or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any action
in reliance upon, this information by persons or entities other than
the intended recipient is prohibited. If you received this in error,
please contact the sender and delete the material from any system and
destroy any copies.
