I have just uploaded a new firmware image to a G3G170-24 running fw rev 6.03.00.0022. After the upload was complete but before the CRC verification I received the following error message: soc_counter_thread unit = 0: DMA did not finish buf32=0x2797ce4
I see in the release notes for fw rev 6.03.01.0008 that a DMA message issue was fixed. I have not yet made 6.03.01.0008 the active image, or reset the switch. The G3 is not yet in production. Is this likely a stray bogus message, or should I be concerned? Thanks in advance -------------------- David France Information Services The Art Institute of Chicago Console session snippet follows: 70026(su)->copy tftp://10.70.0.99/g3-series_06.03.01.0008 system:image TFTP code transfer starting soc_counter_thread unit = 0: DMA did not finish buf32=0x2797ce4 Verifying CRC of file in Flash File System File transfer operation completed successfully. 70026(su)-> 70026(su)-> 70026(su)->show vers Slot Status Ports Model Serial Number Hw Version ---- -------- ----- ---------- ------------- -------------- 1 Present 24 G3G170-24 08360277905C BCM56514 REV 1 2 Present 24 G3G-24SFP 08290668905B BCM56512 REV 1 3 Empty N/A N/A N/A N/A 4 Empty N/A N/A N/A N/A Bootprom Version : 01.00.48 Firmware Version : 06.03.00.0022 Backup Firmware : No Backup Image 70026(su)-> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
