Couple things to keep in mind abt using redistribute cmd. - you won't form ospf neighbors over those interfaces that are part of the redistribution. Must use network command if you want to form ospf neighbors. - redistributed routes are external and they won't be flooded to stub and totally stub areas.
----- Original Message ----- From: [email protected] <[email protected]> To: Enterasys Customer Mailing List <[email protected]> Sent: Wed Mar 23 13:40:09 2011 Subject: Re: [enterasys] OSPF question Walter, The "redistribute connected" command will inject any network that has a layer 3 interface. Per S series 7.11 documentation: Specifies that non‐OSPF information discovered via directly connected interfaces will be redistributed. These are routes not specified in the OSPF network command as described in “network” on page 52‐3. Also, the "redistribute static" command will also inject networks associated with static routes on that router not specified in the network list. Stephen ----- Original Message ----- From: "Walter Witkowski" <[email protected]> To: "Enterasys Customer Mailing List" <[email protected]> Cc: "Enterasys Customer Mailing List" <[email protected]> Sent: Wednesday, March 23, 2011 3:39:41 PM Subject: Re: [enterasys] OSPF question David, So if all routers and there interfaces are to be in area 0 you do not have to enter their ip's with the "network" command. To advertise them all you need is the "redistribute connected" command? Can you verify? thnks in advance walt >>> "Jolie, David" <[email protected]> 3/23/2011 3:55 PM >>> I would think the redistribute connected command is the reason. • --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys Michael.D'[email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
