Hi.. B5 does not support advance routing functions but static and RIP. If you have two B5 switches then just connect them with stacking cable. This way they will act as single switch and do Link aggregation between the access switches and B5 stack.
i.e 1st link from access switch goes to B5 no.1 and 2nd link from the same access switch goes to B5 no.2 . Here B5 no.1 and 2 are in stack. If B5 no.1 fails then B5 no.2 is still active, moreover you have extra bandwidth between access and B5.. Regards, Shashank Devlekar ________________________________ From: Mecir, Lukas [mailto:[email protected]] Sent: Wednesday, August 24, 2011 7:20 PM To: Enterasys Customer Mailing List Subject: [enterasys] VRRP on B5 series switches Hello, According to config guide it seems that B5 switches do not support VRRP, could please someone confirm it? Is there any other way to configure high availability of default gateway on B5 switches (I mean something like HSRP, GLBP...)? Thanks in advance. Lukáš Mečíř System Engineer Siemens Enterprise Communications, s.r.o. držitel licence Siemens AG k obchodní značce Průmyslová 1306/7 102 00 Praha 10, Hostivař Tel: 266 063 610 Fax: 266 063 030 Mobil: 603 882 184 E-mail: [email protected]<mailto:[email protected]> www.hipath.cz<http://www.hipath.cz> Důležité upozornění: Tato zpráva i její případné přílohy jsou důvěrného charakteru, mohou obsahovat obchodní tajemství a být chráněny před zveřejněním. Pokud jste zprávu obdrželi omylem, kontaktujte prosím odesílatele a předmětnou zprávu i s přílohami ihned ze svého systému vymažte. Jakékoli změny, přeposílání či jiné aktivity související s informacemi v této zprávě, nejsou dovoleny jiným osobám, než kterým je zpráva určena. Important Note: This e-mail and any attachment are confidential and may contain trade secrets and may also be legally privileged or otherwise protected from disclosure. If you have received it in error, please notify the sender immediately by e-mail and then delete this e-mail and any attachment from your system. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
