This exchange does not specify the product involved. I can answer for the
product lines I'm responsible for.
The notification is "authenticationFailure" (1.3.6.1.6.3.1.1.5.5). As of
firmware version 5.41 on N/S/K-series we also bind the following enterprise
variables into this trap:
etsysMgmtAuthUserName
etsysMgmtAuthInetAddressType
etsysMgmtAuthInetAddress
Ernie Eaton
Director of Engineering
N/S/K Series Firmware
Enterasys Networks
-----Original Message-----
From: Strebler, Reinhard (SCC) [mailto:[email protected]]
Sent: Tuesday, August 30, 2011 6:45 AM
To: Enterasys Customer Mailing List
Subject: Re: [enterasys] snmp auth fail traps - more detail
Hi,
This question should not be a question to this list, but to the authors
of RFC1213.
We can define our discussion as an improvement request towards Enterasys
for adding an object in their private enterprises MIB:
IP address of last authentication failure.
Kind regards
Reinhard
Am 29.08.2011 22:45, schrieb [email protected]:
> Hi,
> So if I can't find out who tried what from where, what good are those
> "authentication failed" messages?
>
> On 29-Aug-11 11:37, Strebler, Reinhard (SCC) wrote:
>> Hi,
>>
>> Standard MIBs do not provide any information about "who caused an snmp
>> authentication failure". Cisco has an object in their
>> private.enterprises (enterprises.9.2.1.5.0). AFAIK Enterasys has no
>> similar object in their MIB.
>>
>> Kind regards
>> Reinhard
>>
>>
>> Am 29.08.2011 10:29, schrieb [email protected]:
>>> Hi,
>>>
>>> would anyone know where to get details about the IP/community string
>>> that
>>> *caused* an snmp auth fail trap?
>>> I tried to look it up at e.g. iso(1). org(3). dod(6). internet(1).
>>> mgmt(2). mib-2(1). snmp(11). authfail(4) --> doesn't exist.
>>> Netsight Console only tells me there was an incorrect community
>>> string but
>>> nothing more...
>>>
>>> Thanks.
>>>
>>>
>>> ---
>>> To unsubscribe from enterasys, send email to [email protected] with
>>> the body: unsubscribe enterasys [email protected]
>>
>> ---
>> To unsubscribe from enterasys, send email to [email protected] with the
>> body: unsubscribe enterasys [email protected]
>>
>
>
> ---
> To unsubscribe from enterasys, send email to [email protected] with the body:
> unsubscribe enterasys [email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
