Are there any active ports with VLAN 201 assigned? The interface won't come up until the VLAN is active.
-----Original Message----- From: POVEDA SANCHEZ, WENCESLAO [mailto:[email protected]] Sent: Tuesday, March 13, 2012 10:47 AM To: Enterasys Customer Mailing List Subject: [enterasys] B5G routing Hi all, I have this config in a B5G: ! ip route 0.0.0.0 0.0.0.0 192.168.249.1 ! interface vlan 20 ip address 192.168.7.10 255.255.255.0 no shutdown interface vlan 201 ip address 192.168.249.200 255.255.255.0 no shutdown ! arp 192.168.7.1 03BF.C0A8.0701 ! B5G(su)->router#show interface Vlan 20 is Administratively UP Vlan 20 is Operationally UP Internet Address is 192.168.7.10 , Subnet Mask is 255.255.255.0 Mac Address is: 001F.4591.A85F The name of this device is Vlan 20 The MTU is 1500 bytes The bandwidth is 0 Mb/s Encapsulation type Ethernet ARP Timeout: 14400 seconds Vlan 201 is Administratively UP Vlan 201 is Operationally DOWN <=============================== HERE Internet Address is 192.168.249.200 , Subnet Mask is 255.255.255.0 Mac Address is: 001F.4591.A85F The name of this device is Vlan 201 The MTU is 1500 bytes The bandwidth is 0 Mb/s Encapsulation type Ethernet ARP Timeout: 14400 seconds Can anybody tell what I'm doing wrong? I follow the manual step by step but in vlan 201 I always get "Operationally DOWN" Thank you very much. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
