We use Panduit enclosures that were originally purchased for use with Cisco AP’s (although we’ve subsequently bought a great deal more) with some self tapping screws and a sheet metal punch we can fairly easily mount the 3610’s in there. Depending on the location we’ll either mount a terrawave external antenna on the outside of the enclosure, or we’ll mount the AP close to the side and just leave the rabbit ears sticking out the side (using the sheet metal punch to make clean holes in the right spots)
http://www.panduit.com/groups/MPM-BR/documents/SpecificationSheet/099444.pdf It’s a little extra work, but the results are good I think. ------------------------------ James Shuttlesworth Network Technologies Manager Ursinus College Information Technology [email protected]<mailto:[email protected]> From: [email protected]<mailto:[email protected]> [mailto:[email protected]] Sent: Saturday, April 07, 2012 10:38 AM To: Enterasys Customer Mailing List Subject: [enterasys] Aesthetic, Inexpensive Wall Enclosures? We have a new residential building scheduled to open in June of this year, and I'm looking for an attractive surface-mount wall enclosure that can secure/hide my 3610 APs. The best option I've found so far is the Oberon 1032-00, but the planning committee was less than impressed with the looks (e.g., "Why isn't the lid flat?"). Can't say I disagreed. http://www.oberonwireless.com/WebDocs/Model1032-00_Spec_Sheet.pdf Has anyone found something that looks great & works well for the 3610s? Derek Johnson Data Communications Coordinator Fort Hays State University (785) 628 - 5688 [email protected]<mailto:[email protected]> * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
