Intel released new drivers 15.1 for some of these NICs. This behavior is now addressed in the new intel drivers.
Z. From: [email protected] [mailto:[email protected]] Sent: Thursday, September 01, 2011 10:31 AM To: Enterasys Customer Mailing List Subject: [enterasys] Enterasys HiPath and Intel Clients Is anyone out there having any trouble with Intel WLAN adapters and HiPath? Specifically, we've had ~100 student laptops come in with Intel 1000BGN adapters - latest drivers - that remain connected to the network, but stop receiving traffic from our 3610 APs. Disconnect/reconnect and things are fine for a short while, then stop working again. Some clients stop receiving traffic immediately after obtaining an IP address. Open SSID, WPA2, it doesn't matter. I've also had trouble with random versions of the Intel 5100 adapter. 5300/62xx/63xx only seem to experience occasional packet loss but otherwise no major problems. Atheros/Broadcom adapters exhibit none of these issues. I'm currently working with support, but it's pretty slow going so I thought I'd ping to see if others are having the same issues. Running firmware 7.41.05.0003 here. Cheers! Derek Johnson Data Communications Coordinator Fort Hays State University (785) 628 - 5688 [email protected]<mailto:[email protected]> * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
