Hi
Please verify your policy mapping settings. Typically you have to set it to "set policy maptable response booth" means that your authenticated device will get vlan-id AND policy. This should also work with the C5. We did it with Radius authentication at our customers, therefor you need this maptable response, in my opinion it could be also relatet if you did it with a policy. Dynamic vlan egress for your vlan's is enabled? Mit freundlichen Grüßen / Best regards Rainer ADAM System Engineer Imtech ICT Austria GmbH Guglgasse 15 Bauteil 3, 4. Stock A-1110 Wien T: +43 51715 4830 F: +43 51715 99 4830 M: +43 664 851 4830 [email protected]<mailto:[email protected]> [Beschreibung: Beschreibung: https://webmail.imtech.at/logos/imtech.jpg] Imtech ICT Austria GmbH Infrastructure Services www.imtech-ict.at<http://www.imtech-ict.at/> -----Ursprüngliche Nachricht----- Von: Stephen Wilson [mailto:[email protected]] Gesendet: Donnerstag, 21. Juni 2012 01:55 An: Enterasys Customer Mailing List Betreff: [enterasys] IP Phone + User on C5 Hi All, We're a long time N-Series user that has just switched over to C5's... I'm trying to configure the switch such that any MAC address that maps to the OUI of my phone vendor gets dynamically assigned our VoIP policy, but the static default role for the port stays in effect for the user connected through the phone. On the N-Series I'd do this through a MAC to Role mapping in Policy Manager, but it appears the C5 doesn't support that feature. Is there any way to accomplish this sort of setup on the C5 without using authentication? Thanks, Stephen Wilson Network Manager WCU Network and Telecommunication Svcs. --- To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
<<inline: image001.jpg>>
