BTW, I should have added that you can get much the same output from this
command on the S;
S4bonded (su)->show port egress tg.*.*;lag.0.1
tg.2.101 104 untagged static
tg.6.101 108 untagged static
lag.0.1 1 untagged static
lag.0.1 80 tagged static
lag.0.1 112 tagged static
compared with the C5/B5
-C5#1(su)->show vlan portinfo
Port VLAN Ingress Egress
Filter Vlan
-----------------------------------------------------------------
ge.1.1 1 N tagged: 6,160,803
ge.1.2 1 N tagged:
6,160,803,1641,1642,1651,1652,1663,1665,1667
ge.1.3 1 N tagged:
6,803,1641,1642,1651,1652,1663,1665,1667
ge.1.4 1 N tagged:
6,803,1641,1642,1651,1652,1663,1665,1667
g
Billo
Data Communications Co-Ordinator
Information Technology & Telecommunications
ph 0249 213804 fax 0249 213038
[email protected]
-----Original Message-----
From: James Andrewartha [mailto:[email protected]]
Sent: Thursday, 13 September 2012 3:00 PM
To: Enterasys Customer Mailing List
Subject: Re: [enterasys] S4 - show vlan portinfo
On 04/08/11 14:20, Pala, Zdenek wrote:
> Here is result for enhancement request from December 2010:
>
> "Show vlan portinfo"
> The planned future release that will include the above noted request is
> scheduled for inclusion in release version 7.41.
Did this feature actually get implemented? I'm running 07.71.02.0005 and it
doesn't seem to work.
Thanks,
--
James Andrewartha
Network & Projects Engineer
Christ Church Grammar School
Claremont, Western Australia
Ph. (08) 9442 1757
Mob. 0424 160 877
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
