This command is definitely on our work list and will get done first half 2013. On N/S/K we strive to mirror all cli accessible data in MIBs and in fact the CLI normally pulls this data from the MIBs to display it. To gather the data this command requires would have meant querying 4k vlan bitmaps to get each of the details about a vlan for this port. It's performance would have been unacceptable. In the crunch to get some mainline features out we dropped this one.
Sorry Ernie Eaton Dir. of Engineering Modular Platforms Firmware Enterasys Networks On Sep 13, 2012, at 5:09 AM, Andy Middlehurst <[email protected]> wrote: > Hi, > > I agree it’s a VERY useful command and rather surprising it isn’t available > on DFE's or S series (havent tried K), particularly if you're trying to > compare egress settings for ports that are members of a lag with the lag > itself, as I've found the show port egress command doesn’t show the connected > physical ports in the lag. > > Regards, > > Andy > > Networks First Ltd > > Service Desk: +44 (0)845 850 1177 > > Number One > Paper Mill Drive > Church Hill South, > Redditch, > B98 8QJ > Telephone: +44 (0)845 850 5577 > > -----Original Message----- > From: William Olive [mailto:[email protected]] > Sent: 13 September 2012 06:28 > To: Enterasys Customer Mailing List > Subject: RE: [enterasys] S4 - show vlan portinfo > > BTW, I should have added that you can get much the same output from this > command on the S; > > S4bonded (su)->show port egress tg.*.*;lag.0.1 > tg.2.101 104 untagged static > tg.6.101 108 untagged static > lag.0.1 1 untagged static > lag.0.1 80 tagged static > lag.0.1 112 tagged static > > compared with the C5/B5 > > -C5#1(su)->show vlan portinfo > Port VLAN Ingress Egress > Filter Vlan > ----------------------------------------------------------------- > ge.1.1 1 N tagged: 6,160,803 > ge.1.2 1 N tagged: > 6,160,803,1641,1642,1651,1652,1663,1665,1667 > ge.1.3 1 N tagged: > 6,803,1641,1642,1651,1652,1663,1665,1667 > ge.1.4 1 N tagged: > 6,803,1641,1642,1651,1652,1663,1665,1667 > g > > > > > Billo > Data Communications Co-Ordinator > Information Technology & Telecommunications ph 0249 213804 fax 0249 213038 > [email protected] > > > > > -----Original Message----- > From: James Andrewartha [mailto:[email protected]] > Sent: Thursday, 13 September 2012 3:00 PM > To: Enterasys Customer Mailing List > Subject: Re: [enterasys] S4 - show vlan portinfo > > On 04/08/11 14:20, Pala, Zdenek wrote: >> Here is result for enhancement request from December 2010: >> >> "Show vlan portinfo" >> The planned future release that will include the above noted request is >> scheduled for inclusion in release version 7.41. > > Did this feature actually get implemented? I'm running 07.71.02.0005 and it > doesn't seem to work. > > Thanks, > > -- > James Andrewartha > Network & Projects Engineer > Christ Church Grammar School > Claremont, Western Australia > Ph. (08) 9442 1757 > Mob. 0424 160 877 > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
