Hello Walt, For your reference I have included a video on how to setup Alarm Manager in Netsight. You can change the status set by the alarm in the Other Options tab when creating the alarm.
http://www.youtube.com/watch?feature=player_embedded&v=rZ94rksCRmQ You will need to setup traps on the devices in question. You can then use Alarm Manager to change the status of the icon. The traps that you will be triggering off of are listed below. ctEntStateOperEnabled ctEntStateOperDisabled The information contained in these SNMP Traps is: unit index - Stacked unit index for example 1 unit status - Either (Available -- for join) or (Not Available -- for leave) unit description - e.g. "Enterasys Networks, Inc. SecureStack B2" Devices and firmware that support this trap: SecureStack C3, all firmware SecureStack C2, firmware 3.02.30 and higher SecureStack B3, all firmware SecureStack B2, firmware 3.01.16 and higher SecureStack A2, firmware 1.03.17 and higher Enterasys Knowledge base article 10381 explains these traps in more detail. The following Enterasys Knowledge base article can be used if you need to setup traps/informs on the stacks: Article ID 9923 Title: Using NetSight to setup traps and informs on devices Robert Maheu | GTAC Enterasys Networks | A Siemens Enterprise Communications Company Office: 603-952-5630 Email: [email protected] *There is nothing more important than our customers.* On Fri, Apr 12, 2013 at 12:12 PM, Walter Witkowski <[email protected]>wrote: > Hi all, > > Have a question on monitoring the health of a stack of C3's or others. Is > there a way to present a visual indication in the Network Devices column > when a stack loses a switch. If the entire stack fails or loses SNMP the > icon color will change. Can this be done for a single switch failure > within a stack ? > > thnks in advance > > > > *Walt Witkowski *Primary Network Specialist - Office of Information > Technology - Delaware County Community College > 610-359-5017(phone) / 610-359-4123 (fax) / 856-217-4430(cell) > [email protected] > > > - --To unsubscribe from enterasys, send email to [email protected] with > the body: unsubscribe enterasys [email protected] > > --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
