Check out the Enterasys Videos on YouTube http://www.youtube.com/playlist?list=PLD0A4267BC50654DB&feature=plcp
Jason Parker > On Aug 30, 2013, at 4:46 AM, Marki <[email protected]> wrote: > > Hi, > > a few years ago I started digging around the Policy Manager and the NAC. > > However, nothing was ever put into place. > > Now the need for it starts getting more real. > > Now I'd like to configure at least some small things manually: > > Let's start small with the following profile: > 1) Certain MAC ranges put the port into VLAN X. > 2) Else put port into VLAN Y. > > I've tried this on the console. > > set policy profile 1 name GUEST pvid-status enable pvid Y untagged-vlans Y > > set policy rule 1 macsource 00-12-34-00-00-00/24 vlan X > > Showstopper right there. > Apparently, the vlan/macsource combo is not allowed. (C3) > > Was that attempt correct? > > Would you also remind me what the actual NAC appliance does when you do only > stuff like deciding using a MAC address what's done with the port and what's > not (like in my example)? Does it more than push a policy to the switch as I > have done above? > > Bye, > Marki > > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
